I'll delete my old install and start from scratch, then get back to you. So basically you want me to start with a stand alone install? On Aug 23, 2011 2:29 PM, "Gary Banham" <[email protected]> wrote: > Ok lets start with scratch go > > download the opensim version 7.1.1 not diva just the straight version > > run the 32bit opensim start and follow the instructons > > you should be able to connect to opensim as localhost:9000 > > in your consol > > follow the set up instructions as to region and estate ect > > make sure that worked > > after that I'll help you set it up as you like > > > > > > TC > > Gary > > > > > > From: [email protected] > [mailto:[email protected]] On Behalf Of Guardian > Sent: Monday, August 22, 2011 8:08 PM > To: [email protected] > Subject: Re: [Opensim-users] Awaiting region handshake > > > > Any Ideas guys? > > On Mon, Aug 22, 2011 at 1:11 PM, Guardian <[email protected]> wrote: > > ok, so I've put the server in my router's DMZ, and I can HTTP to all the > ports I need (8002 and 9000) and get the hippo page. > > > > I've put the modem's external IP address in regions under external ip, and > the internal ip in the grid-common.ini > > > > now I get thos error in the robust console when trying to connect: > > > > 13:08:08 - [WEB UTIL]: <0> osd request for > http://222.155.61.228:9000/agent/142d8e3f-c5ce-4e88-8a5f-8866da75223f/, > method POST FAILED: Error: ConnectFailure (Connection refused) > > > > > > On Mon, Aug 22, 2011 at 12:24 PM, Gary Banham <[email protected]> wrote: > > you know what thats my thinking you and maby us are overcomplicating the > whole thing > > > > > > From: [email protected] > [mailto:[email protected]] On Behalf Of Gary Beck > Sent: Sunday, August 21, 2011 6:14 PM > > > To: [email protected] > > Subject: Re: [Opensim-users] Awaiting region handshake > > > > If you don't require LAN access then NAT Loopback isn't needed. > > ----- Original Message ----- > > From: Guardian <mailto:[email protected]> > > To: [email protected] > > Sent: Sunday, August 21, 2011 7:43 PM > > Subject: Re: [Opensim-users] Awaiting region handshake > > > > Hi again all, > > > > I'm really struggling to find a router in NZ that supports NAT Loopback... I > spent over an hour with Linksys and they pretty much said none of their > routers support it apart from the E2000 which can't be connected to any NZ > ISP's... > > > > I was just looking at the opensim wiki again, and notice it now says: > > > > "This is an issue since each region has to be specify an IP address for the > client to connect. This is the ExternalHostName parameter in a regions > config file (e.g. bin/Regions/Regions.ini). In the absence of NAT loopback, > if a forward facing IP address is specified (such as 199.149.252.44) then > external clients will be able to connect to the region but clients on your > local network will not. If the internal address were put in ExternalHostName > instead (e.g. 192.168.2.40) then viewers on the local network will be able > to connect but viewers from an external network would not." > > > > My Issue was I couldnt connect to the sim from outside even when the > external IP address was specified in regions. > > > > I don't need to connect to the sim from the LAN, only the WAN so is NAT > loopback still an issue? > > > > _______________________________________________ > Opensim-users mailing list > [email protected] > https://lists.berlios.de/mailman/listinfo/opensim-users > > > > >
_______________________________________________ Opensim-users mailing list [email protected] https://lists.berlios.de/mailman/listinfo/opensim-users
