Thanks Gary, I'll await your config. On Aug 23, 2011 11:54 PM, "Gary Banham" <[email protected]> wrote: > ok I just had my desktop crash so it lost the email I was writing > > I have to get to work when I get home I will send you a copy of my grid > common ini file and the robust to use as example > > stick with the wan address for now and ill help you configure what you want > with Opensim > > then you can figure out dydns when you know Opensim is working properly > > > > TC > > Gary > > > > From: [email protected] > [mailto:[email protected]] On Behalf Of Guardian > Sent: Monday, August 22, 2011 9:26 PM > To: [email protected] > Subject: Re: [Opensim-users] Awaiting region handshake > > > > OK, I did a fresh install, just simple stand alone works fine. > > I used my WAN address for the region externalip. > > If I change the externalip to my dyndns address it no longer works. > > On Aug 23, 2011 2:55 PM, "Guardian" <[email protected]> wrote: >> I'll delete my old install and start from scratch, then get back to you. > So >> basically you want me to start with a stand alone install? >> On Aug 23, 2011 2:29 PM, "Gary Banham" <[email protected]> wrote: >>> Ok lets start with scratch go >>> >>> download the opensim version 7.1.1 not diva just the straight version >>> >>> run the 32bit opensim start and follow the instructons >>> >>> you should be able to connect to opensim as localhost:9000 >>> >>> in your consol >>> >>> follow the set up instructions as to region and estate ect >>> >>> make sure that worked >>> >>> after that I'll help you set it up as you like >>> >>> >>> >>> >>> >>> TC >>> >>> Gary >>> >>> >>> >>> >>> >>> From: [email protected] >>> [mailto:[email protected]] On Behalf Of Guardian >>> Sent: Monday, August 22, 2011 8:08 PM >>> To: [email protected] >>> Subject: Re: [Opensim-users] Awaiting region handshake >>> >>> >>> >>> Any Ideas guys? >>> >>> On Mon, Aug 22, 2011 at 1:11 PM, Guardian <[email protected]> wrote: >>> >>> ok, so I've put the server in my router's DMZ, and I can HTTP to all the >>> ports I need (8002 and 9000) and get the hippo page. >>> >>> >>> >>> I've put the modem's external IP address in regions under external ip, > and >>> the internal ip in the grid-common.ini >>> >>> >>> >>> now I get thos error in the robust console when trying to connect: >>> >>> >>> >>> 13:08:08 - [WEB UTIL]: <0> osd request for >>> http://222.155.61.228:9000/agent/142d8e3f-c5ce-4e88-8a5f-8866da75223f/, >>> method POST FAILED: Error: ConnectFailure (Connection refused) >>> >>> >>> >>> >>> >>> On Mon, Aug 22, 2011 at 12:24 PM, Gary Banham <[email protected]> wrote: >>> >>> you know what thats my thinking you and maby us are overcomplicating the >>> whole thing >>> >>> >>> >>> >>> >>> From: [email protected] >>> [mailto:[email protected]] On Behalf Of Gary Beck >>> Sent: Sunday, August 21, 2011 6:14 PM >>> >>> >>> To: [email protected] >>> >>> Subject: Re: [Opensim-users] Awaiting region handshake >>> >>> >>> >>> If you don't require LAN access then NAT Loopback isn't needed. >>> >>> ----- Original Message ----- >>> >>> From: Guardian <mailto:[email protected]> >>> >>> To: [email protected] >>> >>> Sent: Sunday, August 21, 2011 7:43 PM >>> >>> Subject: Re: [Opensim-users] Awaiting region handshake >>> >>> >>> >>> Hi again all, >>> >>> >>> >>> I'm really struggling to find a router in NZ that supports NAT > Loopback... >> I >>> spent over an hour with Linksys and they pretty much said none of their >>> routers support it apart from the E2000 which can't be connected to any > NZ >>> ISP's... >>> >>> >>> >>> I was just looking at the opensim wiki again, and notice it now says: >>> >>> >>> >>> "This is an issue since each region has to be specify an IP address for >> the >>> client to connect. This is the ExternalHostName parameter in a regions >>> config file (e.g. bin/Regions/Regions.ini). In the absence of NAT >> loopback, >>> if a forward facing IP address is specified (such as 199.149.252.44) then >>> external clients will be able to connect to the region but clients on > your >>> local network will not. If the internal address were put in >> ExternalHostName >>> instead (e.g. 192.168.2.40) then viewers on the local network will be > able >>> to connect but viewers from an external network would not." >>> >>> >>> >>> My Issue was I couldnt connect to the sim from outside even when the >>> external IP address was specified in regions. >>> >>> >>> >>> I don't need to connect to the sim from the LAN, only the WAN so is NAT >>> loopback still an issue? >>> >>> >>> >>> _______________________________________________ >>> Opensim-users mailing list >>> [email protected] >>> https://lists.berlios.de/mailman/listinfo/opensim-users >>> >>> >>> >>> >>> >
_______________________________________________ Opensim-users mailing list [email protected] https://lists.berlios.de/mailman/listinfo/opensim-users
