ok I just had my desktop crash so it lost the email I was writing I have to get to work when I get home I will send you a copy of my grid common ini file and the robust to use as example
stick with the wan address for now and ill help you configure what you want with Opensim then you can figure out dydns when you know Opensim is working properly TC Gary From: [email protected] [mailto:[email protected]] On Behalf Of Guardian Sent: Monday, August 22, 2011 9:26 PM To: [email protected] Subject: Re: [Opensim-users] Awaiting region handshake OK, I did a fresh install, just simple stand alone works fine. I used my WAN address for the region externalip. If I change the externalip to my dyndns address it no longer works. On Aug 23, 2011 2:55 PM, "Guardian" <[email protected]> wrote: > I'll delete my old install and start from scratch, then get back to you. So > basically you want me to start with a stand alone install? > On Aug 23, 2011 2:29 PM, "Gary Banham" <[email protected]> wrote: >> Ok lets start with scratch go >> >> download the opensim version 7.1.1 not diva just the straight version >> >> run the 32bit opensim start and follow the instructons >> >> you should be able to connect to opensim as localhost:9000 >> >> in your consol >> >> follow the set up instructions as to region and estate ect >> >> make sure that worked >> >> after that I'll help you set it up as you like >> >> >> >> >> >> TC >> >> Gary >> >> >> >> >> >> From: [email protected] >> [mailto:[email protected]] On Behalf Of Guardian >> Sent: Monday, August 22, 2011 8:08 PM >> To: [email protected] >> Subject: Re: [Opensim-users] Awaiting region handshake >> >> >> >> Any Ideas guys? >> >> On Mon, Aug 22, 2011 at 1:11 PM, Guardian <[email protected]> wrote: >> >> ok, so I've put the server in my router's DMZ, and I can HTTP to all the >> ports I need (8002 and 9000) and get the hippo page. >> >> >> >> I've put the modem's external IP address in regions under external ip, and >> the internal ip in the grid-common.ini >> >> >> >> now I get thos error in the robust console when trying to connect: >> >> >> >> 13:08:08 - [WEB UTIL]: <0> osd request for >> http://222.155.61.228:9000/agent/142d8e3f-c5ce-4e88-8a5f-8866da75223f/, >> method POST FAILED: Error: ConnectFailure (Connection refused) >> >> >> >> >> >> On Mon, Aug 22, 2011 at 12:24 PM, Gary Banham <[email protected]> wrote: >> >> you know what thats my thinking you and maby us are overcomplicating the >> whole thing >> >> >> >> >> >> From: [email protected] >> [mailto:[email protected]] On Behalf Of Gary Beck >> Sent: Sunday, August 21, 2011 6:14 PM >> >> >> To: [email protected] >> >> Subject: Re: [Opensim-users] Awaiting region handshake >> >> >> >> If you don't require LAN access then NAT Loopback isn't needed. >> >> ----- Original Message ----- >> >> From: Guardian <mailto:[email protected]> >> >> To: [email protected] >> >> Sent: Sunday, August 21, 2011 7:43 PM >> >> Subject: Re: [Opensim-users] Awaiting region handshake >> >> >> >> Hi again all, >> >> >> >> I'm really struggling to find a router in NZ that supports NAT Loopback... > I >> spent over an hour with Linksys and they pretty much said none of their >> routers support it apart from the E2000 which can't be connected to any NZ >> ISP's... >> >> >> >> I was just looking at the opensim wiki again, and notice it now says: >> >> >> >> "This is an issue since each region has to be specify an IP address for > the >> client to connect. This is the ExternalHostName parameter in a regions >> config file (e.g. bin/Regions/Regions.ini). In the absence of NAT > loopback, >> if a forward facing IP address is specified (such as 199.149.252.44) then >> external clients will be able to connect to the region but clients on your >> local network will not. If the internal address were put in > ExternalHostName >> instead (e.g. 192.168.2.40) then viewers on the local network will be able >> to connect but viewers from an external network would not." >> >> >> >> My Issue was I couldnt connect to the sim from outside even when the >> external IP address was specified in regions. >> >> >> >> I don't need to connect to the sim from the LAN, only the WAN so is NAT >> loopback still an issue? >> >> >> >> _______________________________________________ >> Opensim-users mailing list >> [email protected] >> https://lists.berlios.de/mailman/listinfo/opensim-users >> >> >> >> >>
_______________________________________________ Opensim-users mailing list [email protected] https://lists.berlios.de/mailman/listinfo/opensim-users
