* Graham Worley (no-reply at opensolaris.org) wrote: > Thanks Glenn. I poked around the system and managed to get the > following interrupt information from the system. Doesn't look to me > that there is an interrupt problem. Apart from the normal Intel board > the only additional stuff is the two Silicon image SATAs card on the > pci express bus which are showing up in the interrupt list. Does it > look good to you? > > IRQ Vect IPL Bus Trg Type CPU Share APIC/INT# ISR(s) > 1 0x42 5 ISA Edg Fixed 1 1 0x0/0x1 i8042_intr > 4 0xb0 12 ISA Edg Fixed 2 1 0x0/0x4 asyintr > 9 0x81 9 PCI Lvl Fixed 1 1 0x0/0x9 acpi_wrapper_isr > 12 0x43 5 ISA Edg Fixed 2 1 0x0/0xc i8042_intr > 16 0x41 5 PCI Lvl Fixed 0 1 0x0/0x10 si_intr > 17 0x44 5 PCI Lvl Fixed 3 1 0x0/0x11 si_intr > 20 0x40 5 PCI Lvl Fixed 2 1 0x0/0x14 ahci_intr > 22 0x84 9 PCI Lvl Fixed 1 2 0x0/0x16 uhci_intr, uhci_intr > 23 0x83 9 PCI Lvl Fixed 0 3 0x0/0x17 uhci_intr, uhci_intr, > ehci_intr > 48 0x82 7 PCI Edg MSI 3 1 - pepb_intr_handler > 49 0x30 4 PCI Edg MSI 3 1 - pepb_intr_handler > 50 0x60 6 PCI Edg MSI 2 1 - e1000g_intr_pciexpress > 51 0x61 6 PCI Edg MSI 0 1 - e1000g_intr_pciexpress > 160 0xa0 0 Edg IPI all 0 - poke_cpu > 208 0xd0 14 Edg IPI all 1 - kcpc_hw_overflow_intr > 209 0xd1 14 Edg IPI all 1 - cbe_fire > 210 0xd3 14 Edg IPI all 1 - cbe_fire > 240 0xe0 15 Edg IPI all 1 - xc_serv > 241 0xe1 15 Edg IPI all 1 - apic_error_intr
It seems fine to my limited understanding. Out of curiousity, how much memory is on this box? How many disks/zpools? Have you limited the ZFS ARC at all? Cheers, -- Glenn
