On 14.08.2013, at 14:35, Guillaume Gardet wrote: > > Le 14/08/2013 12:33, Alexander Graf a écrit : >> On 12.08.2013, at 14:30, Guillaume Gardet wrote: >> >>> Hi, >>> >>> with JeOS panda image from Factory I get the following error (after >>> workarounded BOOT files problem also reported for beagle, see previous >>> thread): >>> ******************************************************************************** >>> OMAP4430 ES2.2 >>> OMAP SD/MMC: 0 >>> mmc_send_cmd : timeout: No status update >>> Card did not respond to voltage select! >>> spl: mmc init failed: err - -17 >>> ### ERROR ### Please RESET the board ### >>> ******************************************************************************** >>> >>> >>> Does anyone have the same problem? >> Does the same card work with older SPL / u-boot binaries? > > Just tried 12.3 image and I get the same problem. > > With 12.2 image I get a slightly different message: > ******************************************************************************** > U-Boot SPL 2012.04.01 (Sep 08 2012 - 02:14:47) > OMAP4430 ES2.2 > OMAP SD/MMC: 0 > mmc_send_cmd: timedout waiting on cmd inhibit to clear > mmc_send_cmd: timedout waiting on cmd inhibit to clear > mmc_send_cmd: timedout waiting on cmd inhibit to clear > Card did not respond to voltage select!
Looks very similar. Maybe the SD card is incompatible with the OMAP4 MMC controller? Alex -- To unsubscribe, e-mail: [email protected] To contact the owner, e-mail: [email protected]
