On 14.08.2013, at 15:19, Guillaume Gardet wrote: > > Le 14/08/2013 14:44, Alexander Graf a écrit : >> On 14.08.2013, at 14:35, Guillaume Gardet wrote: >> >>> Le 14/08/2013 12:33, Alexander Graf a écrit : >>>> On 12.08.2013, at 14:30, Guillaume Gardet wrote: >>>> >>>>> Hi, >>>>> >>>>> with JeOS panda image from Factory I get the following error (after >>>>> workarounded BOOT files problem also reported for beagle, see previous >>>>> thread): >>>>> ******************************************************************************** >>>>> OMAP4430 ES2.2 >>>>> OMAP SD/MMC: 0 >>>>> mmc_send_cmd : timeout: No status update >>>>> Card did not respond to voltage select! >>>>> spl: mmc init failed: err - -17 >>>>> ### ERROR ### Please RESET the board ### >>>>> ******************************************************************************** >>>>> >>>>> >>>>> Does anyone have the same problem? >>>> Does the same card work with older SPL / u-boot binaries? >>> Just tried 12.3 image and I get the same problem. >>> >>> With 12.2 image I get a slightly different message: >>> ******************************************************************************** >>> U-Boot SPL 2012.04.01 (Sep 08 2012 - 02:14:47) >>> OMAP4430 ES2.2 >>> OMAP SD/MMC: 0 >>> mmc_send_cmd: timedout waiting on cmd inhibit to clear >>> mmc_send_cmd: timedout waiting on cmd inhibit to clear >>> mmc_send_cmd: timedout waiting on cmd inhibit to clear >>> Card did not respond to voltage select! >> Looks very similar. Maybe the SD card is incompatible with the OMAP4 MMC >> controller? > > Yes, maybe. But a bit strange.
I agree, especially because it already loaded the SPL from it :). > I cannot test with another SD card ATM. Will try another one later. Thanks :) Alex -- To unsubscribe, e-mail: [email protected] To contact the owner, e-mail: [email protected]
