Hello, Sad Clouds.
On 24.04.14 1:08 you wrote:

 > Hello, could I ask if OpenSuse 13.1 works with beaglebone? I 
 > followed instructions on 
 > https://en.opensuse.org/HCL:BeagleBone_Black However I get as far as 
 > "Starting kernel" and then nothing else happens. Any ideas? U-Boot 
 > 2013.04 (Mar 17 2014 - 15:34:07) I2C:   ready DRAM:  512 MiB 
 > WARNING: Caches not enabled NAND:  No NAND device found!!! 0 MiB 
 > MMC:   OMAP SD/MMC: 0, OMAP SD/MMC: 1 *** Warning - readenv() 
 > failed, using default environment musb-hdrc: ConfigData=0xde 
 > (UTMI-8, dyn FIFOs, HB-ISO Rx, HB-ISO Tx, SoftConn) musb-hdrc: MHDRC 
 > RTL version 2.0 musb-hdrc: setup fifo_mode 4 musb-hdrc: 28/31 max 
 > ep, 16384/16384 memory USB Peripheral mode controller at 47401000 
 > using PIO, IRQ 0 musb-hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, 
 > HB-ISO Rx, HB-ISO Tx, SoftConn) musb-hdrc: MHDRC RTL version 2.0 
 > musb-hdrc: setup fifo_mode 4 musb-hdrc: 28/31 max ep, 16384/16384 
 > memory USB Host mode controller at 47401800 using PIO, IRQ 0 Net:   
 > <ethaddr> not set. Validating first E-fuse MAC cpsw, usb_ether Hit 
 > any key to stop autoboot:  0 mmc0 is current device SD/MMC found on 
 > device 0 1948 bytes read in 5 ms (379.9 KiB/s) Running bootscript 
 > from mmc0 ... ## Executing script at 80200000 kerneladdr=0x80200000 
 > ramdiskaddr=0x81000000 mmc0 is current device 4500264 bytes read in 
 > 571 ms (7.5 MiB/s) 65308180 bytes read in 8153 ms (7.6 MiB/s) 21959 
 > bytes read in 13 ms (1.6 MiB/s) ## Loading init Ramdisk from Legacy 
 > Image at 81000000 ... Image Name:   Initrd Image Type:   ARM Linux 
 > RAMDisk Image (uncompressed) Data Size:    65308116 Bytes = 62.3 MiB 
 > Load Address: 00000000 Entry Point:  00000000 ## Flattened Device 
 > Tree blob at 80f80000 Booting using the fdt blob at 0x80f80000 Using 
 > Device Tree in place at 80f80000, end 80f885c6 Starting kernel ...
Hi,

It worked some time ago, but you need fetch images from 
home:matwey:beaglebone



--
Best regards!
Posted using Hotdoged on Android

-- 
To unsubscribe, e-mail: [email protected]
To contact the owner, e-mail: [email protected]

Reply via email to