On Sat, 26 Apr 2014 10:50:10 +0100 Sad Clouds <[email protected]> wrote:
> On Sat, 26 Apr 2014 01:13:18 -0700 > lists <[email protected]> wrote: > > > musb-hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, HB-ISO Rx, HB-ISO Tx, > > SoftConn) musb-hdrc: MHDRC RTL version > > 2.0 musb-hdrc: setup fifo_mode > > 4 musb-hdrc: 28/31 max ep, 16384/16384 > > memory USB Peripheral mode controller at 47401000 using PIO, IRQ > > 0 musb-hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, HB-ISO Rx, HB-ISO > > Tx, SoftConn) musb-hdrc: MHDRC RTL version > > 2.0 musb-hdrc: setup fifo_mode > > 4 musb-hdrc: 28/31 max ep, 16384/16384 > > memory USB Host mode controller at 47401800 using PIO, IRQ > > 0 Net: <ethaddr> not set. Validating first E-fuse > > MAC cpsw, > > usb_ether Hit any key to stop autoboot: > > 0 gpio: pin 53 (gpio 53) value is > > 1 mmc0 is current > > device micro SD card > > found mmc0 is current > > device gpio: pin 54 (gpio 54) value is > > 1 SD/MMC found on device > > 0 ** File not found uEnv.txt > > ** gpio: pin 55 (gpio 55) value is > > 1 ** File not found /boot/uImage > > ** U-Boot# > > > > Looks to me like it found the SD card but doesn't boot. This is > > using > > openSUSE-13.1-ARM-JeOS-beaglebone.armv7l-1.12.1-Build33.3.raw.xz > > Don't you have to press and hold S2 switch on beaglebone black, while > turning on power, if you want to boot from SD card? > > Maybe in your case, it is trying to boot from something else? The board will try to boot from the external SD first if present, as far as I know. That is, you had to play with that switch once, and in theory that mode should be set forever. I think the idea is the designer wanted a fast boot, hence the default was not to check the SD card. But since I could boot from Ubuntu on the SD, I know the switch isn't a problem. I overwrote the Ubuntu distribution to load JEOS, so I can't check this at the moment, but will go back later and verify that Ubuntu is still working, then do a follow up post. I don't want anyone to spin their wheels if it is my pilot error. -- To unsubscribe, e-mail: [email protected] To contact the owner, e-mail: [email protected]
