On Sat, 26 Apr 2014 01:13:18 -0700 lists <[email protected]> wrote:
> musb-hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, HB-ISO Rx, HB-ISO Tx, > SoftConn) musb-hdrc: MHDRC RTL version > 2.0 musb-hdrc: setup fifo_mode > 4 musb-hdrc: 28/31 max ep, 16384/16384 > memory USB Peripheral mode controller at 47401000 using PIO, IRQ > 0 musb-hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, HB-ISO Rx, HB-ISO Tx, > SoftConn) musb-hdrc: MHDRC RTL version > 2.0 musb-hdrc: setup fifo_mode > 4 musb-hdrc: 28/31 max ep, 16384/16384 > memory USB Host mode controller at 47401800 using PIO, IRQ > 0 Net: <ethaddr> not set. Validating first E-fuse > MAC cpsw, > usb_ether Hit any key to stop autoboot: > 0 gpio: pin 53 (gpio 53) value is > 1 mmc0 is current > device micro SD card > found mmc0 is current > device gpio: pin 54 (gpio 54) value is > 1 SD/MMC found on device > 0 ** File not found uEnv.txt > ** gpio: pin 55 (gpio 55) value is > 1 ** File not found /boot/uImage > ** U-Boot# > > Looks to me like it found the SD card but doesn't boot. This is using > openSUSE-13.1-ARM-JeOS-beaglebone.armv7l-1.12.1-Build33.3.raw.xz Don't you have to press and hold S2 switch on beaglebone black, while turning on power, if you want to boot from SD card? Maybe in your case, it is trying to boot from something else? -- To unsubscribe, e-mail: [email protected] To contact the owner, e-mail: [email protected]
