2017-10-21 19:47 GMT+03:00 Matwey V. Kornilov <[email protected]>: > 2017-10-21 19:35 GMT+03:00 Matwey V. Kornilov <[email protected]>: >> 2017-10-20 18:02 GMT+03:00 Matwey V. Kornilov <[email protected]>: >>> 2017-10-20 17:37 GMT+03:00 Alexander Graf <[email protected]>: >>>> >>>> >>>> On 20.10.17 16:21, Matwey V. Kornilov wrote: >>>>> 20.10.2017 17:12, Alexander Graf пишет: >>>>>> >>>>>> >>>>>> On 20.10.17 13:57, Matwey V. Kornilov wrote: >>>>>>> Hi, >>>>>>> >>>>>>> I've just received EspressoBin 1G. Any success stories how to run >>>>>>> openSUSE? >>>>>>> >>>>>> >>>>>> I think you'll basically have to somehow flash a working U-Boot with >>>>>> distro boot onto it and then just dd the tumbleweed/42.3 iso onto a usb >>>>>> stick and cross your fingers that gets you to a point where you can >>>>>> install :) >>>>> >>>>> It has microsd card, I think it should be able to boot from sd, no? >>>>> I also need to to find serial console pins on the board :) >>>> >>>> There seems to be a lengthy discussion on the mailing list. I guess you >>>> can select the boot device using DIP switches though? >>> >>> Yes, I can. I think it is preferred way. Need to find expected layout >>> to place u-boot image. >> >> Well, at least while booting from SATA, they say that BootRom looks >> for code starting with zero offset, which implies that there can not >> be any GPT partition table. >> Probably, it is similar for SD. If so, we need to flash our EFI-aware >> u-boot instead of upstream one. >> > > Well, SATA flash image from here > > http://wiki.espressobin.net/tiki-index.php?page=Boot+ESPRESSObin+from+SATA+drive&highlight=sata > > suits for booting from microsd card, when it is flushed from zero > offset and boot selection switchs are set to 7. > > At least, there is non-destructive way to check out u-boot image.
Double checked. Seems that microsd boot doesn't work and is not supported. At least for my V5 board. It just falls back to SPINOR > >>> >>>> >>>> http://espressobin.net/forums/topic/how-to-flash-u-boot/ >>>> >>>> >>>> Alex >>> >>> >>> >>> -- >>> With best regards, >>> Matwey V. Kornilov >> >> >> >> -- >> With best regards, >> Matwey V. Kornilov > > > > -- > With best regards, > Matwey V. Kornilov -- With best regards, Matwey V. Kornilov -- To unsubscribe, e-mail: [email protected] To contact the owner, e-mail: [email protected]
