Now It is booting.
Now, I cannot figure out how to configure networking:
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP
group default qlen 532
link/ether 00:51:82:11:22:00 brd ff:ff:ff:ff:ff:ff
inet6 fe80::251:82ff:fe11:2200/64 scope link
valid_lft forever preferred_lft forever
3: wan@eth0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN
group default qlen 1000
link/ether 00:51:82:11:22:00 brd ff:ff:ff:ff:ff:ff
4: lan0@eth0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN
group default qlen 1000
link/ether 00:51:82:11:22:00 brd ff:ff:ff:ff:ff:ff
5: lan1@eth0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN
group default qlen 1000
link/ether 00:51:82:11:22:00 brd ff:ff:ff:ff:ff:ff
2017-11-14 14:48 GMT+03:00 Matwey V. Kornilov <[email protected]>:
> mSD card is enabled in kernel dtb file only in 4.14.
>
> https://github.com/torvalds/linux/commit/9be778f6c6d8f90ff2fad88d1770e2a7843aee43
>
> 2017-11-14 14:09 GMT+03:00 Matwey V. Kornilov <[email protected]>:
>> Well, 4.13.12-1-default has issues with mmc-driver, so KIWI cannot
>> find boot device.
>>
>> [ 9.651177] sdhci: Secure Digital Host Controller Interface driver
>> [ 9.651182] sdhci: Copyright(c) Pierre Ossman
>> [ 9.652213] sdhci-pltfm: SDHCI platform and OF driver helper
>> [ 9.655798] xenon-sdhci d00d0000.sdhci: failed to get IRQ number
>> [ 9.655809] xenon-sdhci d00d0000.sdhci: sdhci_pltfm_init failed -6
>>
>> I will see, if different version of dtb file helps.
>>
>> --
>> With best regards,
>> Matwey V. Kornilov
>
>
>
> --
> With best regards,
> Matwey V. Kornilov
--
With best regards,
Matwey V. Kornilov
--
To unsubscribe, e-mail: [email protected]
To contact the owner, e-mail: [email protected]
