Hm. It refuses to boot after KIWI deployed. For some reason dracut-generated initrd failed to obtain /dev/mmcblk? devices.
14.11.2017 15:05, Matwey V. Kornilov пишет: > Now It is booting. > > Now, I cannot figure out how to configure networking: > > 2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP > group default qlen 532 > link/ether 00:51:82:11:22:00 brd ff:ff:ff:ff:ff:ff > inet6 fe80::251:82ff:fe11:2200/64 scope link > valid_lft forever preferred_lft forever > 3: wan@eth0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN > group default qlen 1000 > link/ether 00:51:82:11:22:00 brd ff:ff:ff:ff:ff:ff > 4: lan0@eth0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN > group default qlen 1000 > link/ether 00:51:82:11:22:00 brd ff:ff:ff:ff:ff:ff > 5: lan1@eth0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN > group default qlen 1000 > link/ether 00:51:82:11:22:00 brd ff:ff:ff:ff:ff:ff > > 2017-11-14 14:48 GMT+03:00 Matwey V. Kornilov <[email protected]>: >> mSD card is enabled in kernel dtb file only in 4.14. >> >> https://github.com/torvalds/linux/commit/9be778f6c6d8f90ff2fad88d1770e2a7843aee43 >> >> 2017-11-14 14:09 GMT+03:00 Matwey V. Kornilov <[email protected]>: >>> Well, 4.13.12-1-default has issues with mmc-driver, so KIWI cannot >>> find boot device. >>> >>> [ 9.651177] sdhci: Secure Digital Host Controller Interface driver >>> [ 9.651182] sdhci: Copyright(c) Pierre Ossman >>> [ 9.652213] sdhci-pltfm: SDHCI platform and OF driver helper >>> [ 9.655798] xenon-sdhci d00d0000.sdhci: failed to get IRQ number >>> [ 9.655809] xenon-sdhci d00d0000.sdhci: sdhci_pltfm_init failed -6 >>> >>> I will see, if different version of dtb file helps. >>> >>> -- >>> With best regards, >>> Matwey V. Kornilov >> >> >> >> -- >> With best regards, >> Matwey V. Kornilov > > > -- To unsubscribe, e-mail: [email protected] To contact the owner, e-mail: [email protected]
