On 08/06/12 02:32, Luka Perkov wrote:
Board owners please test this patch and give feedback for the boards:
* sheevaplug
* dockstar
* iconnect
You can use kwboot tool like this (run as root):
./bin/kirkwood/u-boot-kwboot/kwboot -b
bin/kirkwood/openwrt-kirkwood-ib62x0-u-boot.kwb -p /dev/ttyUSB0
As soon as it is finished run your favorite terminal like usual. With
kwboot you can not brick your boards. It sends bootloader via serial and
does not touch the flash... You can recover board with no bootloader
using this tool.
My iConnect doesn't seem to do anything with this tool, all I get is
Sending boot message. Please reboot the target...- and a spinning
cursor, the iConnect doesn't boot.
According to strace kwboot continues in a loop doing
ioctl(3, TCFLSH, 0x2) = 0
write(3, "\273\21\"3DUfw", 8) = 8
ioctl(3, TCSBRK, 0x1) = 0
select(4, [3], NULL, NULL, {0, 50000}) = 0 (Timeout)
If I try and tftpboot the bin file I get the following:
Marvell>> tftp 0x800000 iconnect/openwrt-kirkwood-iconnect-u-boot.bin
Using egiga0 device
TFTP from server 192.168.1.1; our IP address is 192.168.1.10
Filename 'iconnect/openwrt-kirkwood-iconnect-u-boot.bin'.
Load address: 0x800000
Loading: #################################################################
#######
done
Bytes transferred = 364540 (58ffc hex)
Marvell>> go 0x800000
## Starting application at 0x00800000 ...
software interrupt
pc : [<00800dcc>] lr : [<0060022c>]
sp : 00600000 ip : c8012078 fp : 005ff25c
r10: 00000000 r9 : 00000000 r8 : c8012000
r7 : 005ff67f r6 : 00000002 r5 : 005ffe78 r4 : 00000000
r3 : 00000000 r2 : 00000000 r1 : 00000000 r0 : deadbeef
Flags: nzcv IRQs on FIQs on Mode USER_26
Resetting CPU ...
I have messed about with the iconnect a fair bit and I've never managed
to get another uboot binary to chain boot in it.
--
Tim Fletcher<[email protected]>
_______________________________________________
openwrt-devel mailing list
[email protected]
https://lists.openwrt.org/mailman/listinfo/openwrt-devel
