i get "The uploaded image file does not contain a supported format. Make sure that you choose the generic image format for your platform." from web interface.
this is what i have: -rw-r--r-- 1 diffie diffie 8919040 2014-06-24 15:58 bin/ar71xx/openwrt-ar71xx-nand-wndr3700v4-squashfs-sysupgrade.tar should i push it from shell using sysupgrade script? thanks! On Tue, 2014-06-24 at 22:32 +0200, John Crispin wrote: > > On 24/06/2014 22:25, Paul Blazejowski wrote: > > Hi again, > > > > thanks for the tftp fix, flushing just became so much faster and > > easier. > > > > Tested trunk r41336 after your jffs2 fix and the image boots fine, > > restored my configuration changes, rebooted the router and all > > changes are saved now. I will post the working dmesg to the ticket > > at https://dev.openwrt.org/ticket/16840 but it is safe to say that > > you can close it ;-) now. > > > > Sysupgrade image(s) for 3700v4 and 4300 do not work now, guess this > > is next on the list... > > > > i tested 4300 and it works. you need to use the *-ubi-sysupgrade.tar file. > > > > > > Thank you, -paul > > > > On Tue, 2014-06-24 at 20:18 +0200, John Crispin wrote: > >> > >> On 24/06/2014 19:05, Paul Blazejowski wrote: > >>> John, > >>> > >>> Yes i use the reset with pin and from there i tftp the > >>> original firmware from netgear after that i go to the gui and > >>> upload the open-wrt image because the router will not accept > >>> the wndr3700v4 image (there's a cosmetic fix for that, i > >>> created a patch that someone from the forums has sent months > >>> ago to this list but it was never accepted...) > >>> https://dev.openwrt.org/ticket/16840 > >>> > >>> With that patch tftp'ing the > >>> openwrt-ar71xx-nand-wndr3700v4-ubi-factory.img works without > >>> need to flash the original firmware. > >>> > >>> If there's another method that can be used to flash the > >>> image(s) please let me know i would want to try any alternative > >>> ways of flashing and could learn a thing or two in the process > >>> as well ;-) > >>> > >>> Thank you, -paul > >> > >> > >> Hi, > >> > >> i just pushed the V vs v fix and another fix that removes the > >> jffs2 magic. i think this might have been the cause of the > >> problems. please retry with current trunk and let me know if the > >> problem is gone or still there > >> > >> John _______________________________________________ > >> openwrt-devel mailing list [email protected] > >> https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel > >> > >> > >> _______________________________________________ openwrt-devel > >> mailing list [email protected] > >> https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel > _______________________________________________ > openwrt-devel mailing list > [email protected] > https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
signature.asc
Description: This is a digitally signed message part
_______________________________________________ openwrt-devel mailing list [email protected] https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
