Hi, can someone with a 3700v4 run "cat /tmp/sysinfo/*" on a 3700 ?
the sysupgrade fails because the board id is not added yet in the upgrade script. however i fail to figure out what id it gets from the ar71xx.sh script John On 25/06/2014 06:27, Adam Kuklycz wrote: > Hi all, > > I've flashed my Netgear WNDR4300 with trunk r41336 and have run a > series of tests. > > Everything looks great! I can restore backed up settings, I can > configure it from scratch too should I desire. > > Sysupgrade works fine on my WNDR4300 via the web UI. Paul if > you're still having issues with this on your WNDR3700v4 it may be > specific to that model; I do not have one of these to test on > unfortunately. But sysupgrade on the WNDR4300 works and works well. > All settings are kept when sysupgrading too. > > If it helps Paul out I can email him my config file, write me > directly for it; that should eliminate any mistakes that have been > overlooked. Easy to do. > > Will run the router for a few hours on the test bench and do some > traffic through it, should that play nice then it's problems > resolved on my end :) > > Cheers Adam > > > On 25/06/14 13:14, Paul Blazejowski wrote: >> Adam, >> >> what do you know? hehehe when one sleeps another fixes things >> ;-) >> >> so far so good, my router has been up for few hours without >> problems... there's still issue with the sysupgrade image that >> John is already aware of ... and may have a fix for us to test >> ... one fix at a time they say. >> >> glad we made much progress today! >> >> thank you all! >> >> >> On Wed, 2014-06-25 at 00:07 +0000, Adam Kuklycz wrote: >>> Geez, it must be true that you should only sleep when you're >>> dead...damn Aussie time zones... >>> >>> I'll test with latest trunk as well & will confirm. But looks >>> promising! >>> >>> >>> >>> -----Original Message----- From: openwrt-devel >>> [mailto:openwrt-devel-boun...@lists.openwrt.org] On Behalf Of >>> Paul Blazejowski Sent: Wednesday, 25 June 2014 6:27 AM To: John >>> Crispin Cc: openwrt-devel@lists.openwrt.org Subject: Re: >>> [OpenWrt-Devel] [BUG] NAND sysupgrade broke ubifs on Netgear >>> WNDR3700v4/4300. >>> >>> sorry i meant https://dev.openwrt.org/ticket/16803 the previous >>> one is closed for good ;-) >>> >>> >>> On Tue, 2014-06-24 at 16:25 -0400, Paul Blazejowski wrote: >>>> Hi again, >>>> >>>> thanks for the tftp fix, flushing just became so much faster >>>> and easier. >>>> >>>> Tested trunk r41336 after your jffs2 fix and the image boots >>>> fine, restored my configuration changes, rebooted the router >>>> and all changes are saved now. I will post the working dmesg >>>> to the ticket at https://dev.openwrt.org/ticket/16840 but it >>>> is safe to say that you can close it ;-) now. >>>> >>>> Sysupgrade image(s) for 3700v4 and 4300 do not work now, >>>> guess this is next on the list... >>>> >>>> Thank you, -paul >>>> >>>> On Tue, 2014-06-24 at 20:18 +0200, John Crispin wrote: >>>>> On 24/06/2014 19:05, Paul Blazejowski wrote: >>>>>> John, >>>>>> >>>>>> Yes i use the reset with pin and from there i tftp the >>>>>> original firmware from netgear after that i go to the gui >>>>>> and upload the open-wrt image because the router will not >>>>>> accept the wndr3700v4 image (there's a cosmetic fix for >>>>>> that, i created a patch that someone from the forums has >>>>>> sent months ago to this list but it was never >>>>>> accepted...) https://dev.openwrt.org/ticket/16840 >>>>>> >>>>>> With that patch tftp'ing the >>>>>> openwrt-ar71xx-nand-wndr3700v4-ubi-factory.img works >>>>>> without need to flash the original firmware. >>>>>> >>>>>> If there's another method that can be used to flash the >>>>>> image(s) please let me know i would want to try any >>>>>> alternative ways of flashing and could learn a thing or >>>>>> two in the process as well ;-) >>>>>> >>>>>> Thank you, -paul >>>>> >>>>> Hi, >>>>> >>>>> i just pushed the V vs v fix and another fix that removes >>>>> the jffs2 magic. i think this might have been the cause of >>>>> the problems. please retry with current trunk and let me >>>>> know if the problem is gone or still there >>>>> >>>>> John _______________________________________________ >>>>> openwrt-devel mailing list openwrt-devel@lists.openwrt.org >>>>> https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel >>>> >>>>> _______________________________________________ >>>> openwrt-devel mailing list openwrt-devel@lists.openwrt.org >>>> https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel >>> >>>> _______________________________________________ >>> openwrt-devel mailing list openwrt-devel@lists.openwrt.org >>> https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel > >>> _______________________________________________ > openwrt-devel mailing list openwrt-devel@lists.openwrt.org > https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel > _______________________________________________ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel