On 24/06/2014 22:43, Paul Blazejowski wrote: > i get "The uploaded image file does not contain a supported format. > Make sure that you choose the generic image format for your > platform." from web interface. > > this is what i have: > > -rw-r--r-- 1 diffie diffie 8919040 2014-06-24 15:58 > bin/ar71xx/openwrt-ar71xx-nand-wndr3700v4-squashfs-sysupgrade.tar > > should i push it from shell using sysupgrade script? >
it will work from shell, i will look into why it fails via webui. > thanks! > > > On Tue, 2014-06-24 at 22:32 +0200, John Crispin wrote: >> >> On 24/06/2014 22:25, Paul Blazejowski wrote: >>> Hi again, >>> >>> thanks for the tftp fix, flushing just became so much faster >>> and easier. >>> >>> Tested trunk r41336 after your jffs2 fix and the image boots >>> fine, restored my configuration changes, rebooted the router >>> and all changes are saved now. I will post the working dmesg to >>> the ticket at https://dev.openwrt.org/ticket/16840 but it is >>> safe to say that you can close it ;-) now. >>> >>> Sysupgrade image(s) for 3700v4 and 4300 do not work now, guess >>> this is next on the list... >>> >> >> i tested 4300 and it works. you need to use the >> *-ubi-sysupgrade.tar file. >> >> >> >> >>> Thank you, -paul >>> >>> On Tue, 2014-06-24 at 20:18 +0200, John Crispin wrote: >>>> >>>> On 24/06/2014 19:05, Paul Blazejowski wrote: >>>>> John, >>>>> >>>>> Yes i use the reset with pin and from there i tftp the >>>>> original firmware from netgear after that i go to the gui >>>>> and upload the open-wrt image because the router will not >>>>> accept the wndr3700v4 image (there's a cosmetic fix for >>>>> that, i created a patch that someone from the forums has >>>>> sent months ago to this list but it was never accepted...) >>>>> https://dev.openwrt.org/ticket/16840 >>>>> >>>>> With that patch tftp'ing the >>>>> openwrt-ar71xx-nand-wndr3700v4-ubi-factory.img works >>>>> without need to flash the original firmware. >>>>> >>>>> If there's another method that can be used to flash the >>>>> image(s) please let me know i would want to try any >>>>> alternative ways of flashing and could learn a thing or two >>>>> in the process as well ;-) >>>>> >>>>> Thank you, -paul >>>> >>>> >>>> Hi, >>>> >>>> i just pushed the V vs v fix and another fix that removes >>>> the jffs2 magic. i think this might have been the cause of >>>> the problems. please retry with current trunk and let me know >>>> if the problem is gone or still there >>>> >>>> John _______________________________________________ >>>> openwrt-devel mailing list [email protected] >>>> https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel >>>> >>>> >>>> >>>> _______________________________________________ openwrt-devel >>>> mailing list [email protected] >>>> https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel >> >>>> _______________________________________________ >> openwrt-devel mailing list [email protected] >> https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel _______________________________________________ openwrt-devel mailing list [email protected] https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
