I tried adding support for 3.18 and I have issues booting the raspberry. There must be something wrong with the new mmc driver, because it detects the SD card insertions/extractiones, but doesn't read the partitions: http://pastebin.com/GWFYrXnT
My patches: http://files.noltari.es/openwrt/bcm2708/brcm2708_3-18.tgz Regards, Álvaro. El 09/02/2015 a las 18:12, Florian Fainelli escribió: > On Feb 9, 2015 4:25 AM, "John Crispin" <blo...@openwrt.org > <mailto:blo...@openwrt.org>> wrote: >> >> Hi, >> >> i synced our rpi port with the upstream tree on github. it boots and i >> can see the coloured palette test pic on the hdmi, however ethernet >> fails to come up. i attached a uart just to find out that my rpi is >> either broken or i am connecting it wrong. >> >> has anyone managed to get uart working ? to my understanding i need to >> connect pin6 to gnd and use 8 and 10 for the 2 data lines. should i see >> output from the bootloader prior to board detecting/loading the sd card > > You will not get any UART output prior to the kernel boot, the GPU boot code > does not output anything (at least not in the builds we use). > > Could you share the boot log to see if there is anything obvious? > >> >> John >> _______________________________________________ >> openwrt-devel mailing list >> openwrt-devel@lists.openwrt.org <mailto:openwrt-devel@lists.openwrt.org> >> https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel > > > > _______________________________________________ > openwrt-devel mailing list > openwrt-devel@lists.openwrt.org > https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel > _______________________________________________ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel