Most of the M/XW platform settings can be shared so move those common DTS bits into include file.
Tested-by: Joe Ayers <[email protected]> Signed-off-by: Petr Štetiar <[email protected]> --- target/linux/ath79/dts/ar9342_ubnt_bullet-m-xw.dts | 11 +++-------- target/linux/ath79/dts/ar9342_ubnt_xw.dtsi | 8 ++++++++ 2 files changed, 11 insertions(+), 8 deletions(-) diff --git a/target/linux/ath79/dts/ar9342_ubnt_bullet-m-xw.dts b/target/linux/ath79/dts/ar9342_ubnt_bullet-m-xw.dts index ad98075..7e4862e 100644 --- a/target/linux/ath79/dts/ar9342_ubnt_bullet-m-xw.dts +++ b/target/linux/ath79/dts/ar9342_ubnt_bullet-m-xw.dts @@ -15,20 +15,19 @@ status = "okay"; phy-mask = <4>; + phy4: ethernet-phy@4 { - phy-mode = "rgmii"; reg = <4>; + phy-mode = "rgmii"; }; }; ð0 { status = "okay"; - pll-data = <0x06000000 0x00000101 0x00001313>; - mtd-mac-address = <&eeprom 0x0>; - phy-mode = "rgmii"; phy-handle = <&phy4>; + mtd-mac-address = <&eeprom 0x0>; gmac-config { device = <&gmac>; @@ -36,7 +35,3 @@ rxdv-delay = <3>; }; }; - -ð1 { - status = "disabled"; -}; diff --git a/target/linux/ath79/dts/ar9342_ubnt_xw.dtsi b/target/linux/ath79/dts/ar9342_ubnt_xw.dtsi index 742df11..812810f 100644 --- a/target/linux/ath79/dts/ar9342_ubnt_xw.dtsi +++ b/target/linux/ath79/dts/ar9342_ubnt_xw.dtsi @@ -117,3 +117,11 @@ mtd-cal-data = <&eeprom 0x1000>; mtd-mac-address = <&eeprom 0x1002>; }; + +&mdio1 { + status = "disabled"; +}; + +ð1 { + status = "disabled"; +}; -- 1.9.1 _______________________________________________ openwrt-devel mailing list [email protected] https://lists.openwrt.org/mailman/listinfo/openwrt-devel
