Currently there is no LED signalization for various system states implemented in diag.sh, so this patch adds support for it.
Tested-by: Joe Ayers <[email protected]> Signed-off-by: Petr Štetiar <[email protected]> --- target/linux/ath79/dts/ar9342_ubnt_xw.dtsi | 13 ++++++++++--- 1 file changed, 10 insertions(+), 3 deletions(-) diff --git a/target/linux/ath79/dts/ar9342_ubnt_xw.dtsi b/target/linux/ath79/dts/ar9342_ubnt_xw.dtsi index b104bc6..742df11 100644 --- a/target/linux/ath79/dts/ar9342_ubnt_xw.dtsi +++ b/target/linux/ath79/dts/ar9342_ubnt_xw.dtsi @@ -9,15 +9,22 @@ compatible = "ubnt,xw", "qca,ar9342"; model = "Ubiquiti Networks XW board"; + aliases { + led-boot = &boot; + led-failsafe = &failsafe; + led-running = &boot; + led-upgrade = &upgrade; + }; + gpio-leds { compatible = "gpio-leds"; - link1 { + upgrade: link1 { label = "ubnt:red:link1"; gpios = <&gpio 11 GPIO_ACTIVE_LOW>; }; - link2 { + failsafe: link2 { label = "ubnt:orange:link2"; gpios = <&gpio 16 GPIO_ACTIVE_LOW>; }; @@ -27,7 +34,7 @@ gpios = <&gpio 13 GPIO_ACTIVE_LOW>; }; - link4 { + boot: link4 { label = "ubnt:green:link4"; gpios = <&gpio 14 GPIO_ACTIVE_LOW>; }; -- 1.9.1 _______________________________________________ openwrt-devel mailing list [email protected] https://lists.openwrt.org/mailman/listinfo/openwrt-devel
