#14571: AP121 Reference Board image not being made
-------------------------+------------------------
Reporter: gonzo.ja@… | Owner: developers
Type: defect | Status: new
Priority: normal | Milestone:
Component: packages | Version: Trunk
Resolution: | Keywords:
-------------------------+------------------------
Comment (by attila.lendvai):
any progress on this? i'm stuck with this on chaos calmer.
{{{
ar7240> printenv
bootargs=console=ttyATH0,115200 board=AP121
mtdparts=spi0.0:256k(u-boot),64k(u-boot-
env),6144k(rootfs),1600k(kernel),64k(nvram),64k(art),7744k@0x50000(firmware)
bootcmd=bootm 0x9f650000
bootdelay=1
baudrate=115200
ethaddr=0x00:0xaa:0xbb:0xcc:0xdd:0xee
ipaddr=192.168.1.2
serverip=192.168.1.10
stdin=serial
stdout=serial
stderr=serial
ethact=eth0
Environment size: 346/65532 bytes
}}}
{{{
U-Boot 1.1.4 (Nov 17 2012 - 15:54:57)
AP121 (ar9331) U-boot
DRAM: 64 MB
Top of RAM usable for U-Boot at: 84000000
Reserving 139k for U-Boot at: 83fdc000
Reserving 192k for malloc() at: 83fac000
Reserving 44 Bytes for Board Info at: 83fabfd4
Reserving 36 Bytes for Global Data at: 83fabfb0
Reserving 128k for boot params() at: 83f8bfb0
Stack Pointer at: 83f8bf98
Now running in RAM - U-Boot at: 83fdc000
Flash Manuf Id 0xef, DeviceId0 0x40, DeviceId1 0x17
flash size 8388608, sector count = 128
Flash: 8 MB
Using default environment
In: serial
Out: serial
Err: serial
Net: ag7240_enet_initialize...
No valid address in Flash. Using fixed address
No valid address in Flash. Using fixed address
: cfg1 0x5 cfg2 0x7114
eth0: 00:03:7f:09:0b:ad
eth0 up
: cfg1 0xf cfg2 0x7214
eth1: 00:03:7f:09:0b:ad
athrs26_reg_init_lan
ATHRS26: resetting s26
ATHRS26: s26 reset done
eth1 up
eth0, eth1
Hit any key to stop autoboot: 0
ar7240>
}}}
--
Ticket URL: <https://dev.openwrt.org/ticket/14571#comment:8>
OpenWrt <http://openwrt.org>
Opensource Wireless Router Technology
_______________________________________________
openwrt-tickets mailing list
[email protected]
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-tickets
