En/na Luca Olivetti ha escrit: > The wireless chip is an atheros 2417 (3rd photo), the switch is a > realtek (2nd photo) and there's not much else there. > I suppose it's a danube because the firmware file (that I cannot > decipher) it's called > "ya.com-FW-1.00.001(danube-AnnexA-ISDNx-FXOx-USB).bin", and there are > references to DANUBE inside (e.g. there's an embedded zip file with a > "DANUBE_2.1.2.15.0.1.bin" file). > On the second photo you can see a J2 header that's probably a serial port. > Do you think it's really based on the danube chipset? If so it should be > possible to run openwrt on it, though I won't have the possibility to > experiment too much since the device will be providing my main phone > line (through its FXS ports).
I managed to connect a serial cable and get a bootlog and it is definitely a danube. The bootlog is similar to the one here: http://wiki.openwrt.org/OpenWrtDocs/Hardware/T-Com/Speedport_W700V It's available as danube.txt under ventoso.org/luca/ (I don't put the full url since I don't want it to be picked up by the search engines). What can I do with it? (considering that I cannot brick it and it has to be possible to go back to the original firmware) Bye -- Luca _______________________________________________ openwrt-users mailing list [email protected] http://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-users
