On Thu, Jan 13, 2011 at 3:10 PM, Markus Lindenberg <[email protected]> wrote: > I just checked, it's there. > > make menuconfig -> Target System -> scroll down -> "Intel IPX4xx" (and > at least Marvell Orion+Kirwood arm) > > That's about everything i know regarding embedded arm, because for me > it just works from here and i'm only using IXP4xx and Kirkwood based > devices (Sheevaplug, NSLU2, WRV54G).
Dear Markus, Thanks for your help. I find the Intel IXP4XX in the Target System menu. However, I aam facing some issues while performing the "make kernel_menuconfig". First I was stopped with "quilt" error. Then, I installed the "quilt". After that, I was stopped with the following error. make[4]: armeb-openwrt-linux-uclibcgnueabi-gcc: Command not found make[4]: armeb-openwrt-linux-uclibcgnueabi-gcc: Command not found make[4]: armeb-openwrt-linux-uclibcgnueabi-gcc: Command not found CC kernel/bounds.s /bin/sh: armeb-openwrt-linux-uclibcgnueabi-gcc: not found make[5]: *** [kernel/bounds.s] Error 127 make[4]: *** [prepare0] Error 2 make[3]: *** [prepare] Error 2 make[3]: Leaving directory `/home/madhavi/backfire/build_dir/linux-ixp4xx_generic/linux-2.6.32.27' make[2]: [menuconfig] Error 2 (ignored) rm -rf /home/madhavi/backfire/build_dir/linux-ixp4xx_generic/modules make[2]: Leaving directory `/home/madhavi/backfire/target/linux/ixp4xx' make[1]: Leaving directory `/home/madhavi/backfire/target/linux' Currently, I am looking into this issue. Could you please let me know, if I am doing any thing wrong here? Thanks in advance. Regards, Madhavi M. > Regards, Markus > > On Thu, Jan 13, 2011 at 06:49, Madhavi Manchala <[email protected]> > wrote: >> >> Dear Markus, >> >> I am not getting the ixp4xx in Target System menu of the "make >> menuconfig". However, I am able to see ixp4xx directory in >> backfire/target/linux directory. >> >> Please let me know, how can I get the ixp4xx in the Target System menu >> of the make menuconfig. >> >> Thanks and Regards, >> Madhavi M. >> >>> To look up the right machine type for your device, have a look at >>> http://www.arm.linux.org.uk/developer/machines/ >>> >>> Regards, >>> Markus >>> >>> On Wed, Jan 12, 2011 at 16:02, Madhavi Manchala <[email protected]> >>> wrote: >>>> Dear All, >>>> >>>> Does OpenWRT supports the ARM architecture? If does not, how can I >>>> build the images for ARM architecture? Is there any documentation for >>>> building the images for ARM? >>>> >>>> I am new to OpenWRT. I followed the >>>> http://wiki.openwrt.org/doc/howto/build link to download and build the >>>> OpenWRT. I downloaded OpenWRT backfire successfully. However, I did >>>> not find the ARM in the "Target System" menu after running the "make >>>> menuconfig" from backfire folder. >>>> >>>> Is there any method for building the OpenWRT images for ARM? >>>> >>>> Any idea / suggestion would be appreciated. >>>> >>>> Thanks and Regards, >>>> Madhavi M. >>>> _______________________________________________ >>>> openwrt-users mailing list >>>> [email protected] >>>> https://lists.openwrt.org/mailman/listinfo/openwrt-users >>>> >>> _______________________________________________ >>> openwrt-users mailing list >>> [email protected] >>> https://lists.openwrt.org/mailman/listinfo/openwrt-users >>> >> _______________________________________________ >> openwrt-users mailing list >> [email protected] >> https://lists.openwrt.org/mailman/listinfo/openwrt-users >> > _______________________________________________ > openwrt-users mailing list > [email protected] > https://lists.openwrt.org/mailman/listinfo/openwrt-users > _______________________________________________ openwrt-users mailing list [email protected] https://lists.openwrt.org/mailman/listinfo/openwrt-users
