2015-04-12 23:51 GMT+02:00 Aaron Z <[email protected]>: > On Sun, Apr 12, 2015 at 3:58 PM, Brian J. Murrell <[email protected]> > wrote: > > config switch_vlan > > option vlan '1' > > option vid '1' > > option device 'switch0' > > option ports '0t 1 2 3 4' > > config switch_vlan > > option device 'switch0' > > option vlan '2' > > option ports '0t 1t' > > option vid '100' > Try setting the vlan and vid for the guest network to 3 or 4. Some > hardware (the TPlink 1043 for example) gets fussy about high vlan IDs > and in some cases, vlan 2 is used for WAN. > Switching to vlan 3 or 4 should let you see if that is the case on > your hardware as well. > > I knew OpenWrt vlans were limited to 16 and I welcomed higher VLAN IDs :-) I back the test of Aaron.
As to my "theory" I'd suppose that vid force somehow the usage of the tag. Maybe it's not correctly implemented and gives you that weird situation. And in any case mine are just tests to see what we get by modifying a bit the config. Moreover, what do you get from swconfig dev <I guess eth0> show? Alessandro
_______________________________________________ openwrt-users mailing list [email protected] https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-users
