On Sun, 2015-04-12 at 17:51 -0400, Aaron Z wrote: > Try setting the vlan and vid for the guest network to 3 or 4.
I tried vlan 5. vlans 0-3 are already in use here on various routers
for wan ports, etc.
But no change. The port is still tagging the packets that are
configured in the switch to be untagged.
But here is something interesting. Despite the switch configuration of:
config switch
option reset '1'
option enable_vlan '1'
option name 'switch0'
config switch_vlan
option vlan '1'
option vid '1'
option device 'switch0'
option ports '0t 1 2 3 4'
config switch_vlan
option device 'switch0'
option vlan '2'
option ports '0t 1t'
option vid '5'
The switch is still being configured to tag vlan 1 on port 1:
# swconfig dev switch0 show
...
VLAN 1:
vid: 1
ports: 0t 1t 2 3 4
VLAN 2:
vid: 5
ports: 0t 1t
Am I barking up the wrong tree? Is it just impossible to have both
tagged and an untagged VLANs on the same physical port?
Cheers,
b.
signature.asc
Description: This is a digitally signed message part
_______________________________________________ openwrt-users mailing list [email protected] https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-users
