Hi Erich,
I am sorry for the late response. Yes, once I did run
"systemconfigurator --runboot --verbose", it worked magically.
I can post the output if this helps but I have still no idea why it did
not work on the client nodes. It used to work just fine when trunk was
tested on RHEL3 X86.
Thank you Erich, :-)
Regards,
- DongInn
Erich Focht wrote:
> On Tuesday 15 August 2006 22:23, DongInn Kim wrote:
>
>> Hi,
>>
>> I have tried to install branch 5.0(nightly tarball) on RHEL3-U6-X86 and
>> I found that there is something wrong with Step 6 "Setting up Network".
>> Transferring image to the client nodes seems to work normal but when the
>> client node reboots, the following error shows up on its console and
>> there seems to be nothing I can do on the client nodes.
>>
>> =================================================
>> Booting '2.4.21-37.ELsmp_(hd0,0)'
>>
>> root (hd0,0)
>> Filesystem type is ext2fx, partition type 0x83
>> kernel /vmlinuz-2.4.21-37.ELsmp ro root=/dev/hdb6
>> [Linux-bzImage, setup=0x1400, size=0x14b96bf]
>> initrd
>>
>> Error 1: Filename must be either an absolute pathname or blocklist
>>
>
> Hmmm, your initrd seems to be missing.
>
> Could you please try (on the client node):
> - boot into the rescue system (with the first installation CD, "linux rescue"
> at the prompt).
> - let it mount the system (will go to /mnt/system???)
> - chroot into the mounted installation
> - run:
> systemconfigurator --runboot --verbose
>
> and post the output ;-) It should give us some hint why the sc-initrd wasn't
> built.
>
> Also: please check the content of /etc/systemconfig/systemconfig.conf. It is
> short, please post it, too.
>
> Thanks,
> best regards,
> Erich
>
>
>
>> Press any key to continue...
>> =================================================
>>
>> I have tried to test it with the newer version of systemimager (3.7.4)
>> but I got the same error.
>>
>> Has anyone seen this kind of problem?
>>
>> Regards,
>>
>>
--
- DongInn
---------------------------
OSL System administrator
[EMAIL PROTECTED]
Indiana University
Bloomington, IN
2006-7-22 5:36:44 [Initrd :: Line 69] Testing for ramdisk type 'Initrd::SuSE'
2006-7-22 5:36:44 [Initrd :: Line 69] Testing for ramdisk type 'Initrd::RH'
2006-7-22 5:36:44 [Initrd :: Line 71] Setting up ramdisk type 'Initrd::RH'
2006-7-22 5:36:44 [Initrd :: Line 94] Setting up kernel:
/boot/vmlinuz-2.4.21-37.ELsmp for root device: /dev/hdb6
2006-7-22 5:36:45 [Initrd :: Line 94] Setting up kernel:
/boot/vmlinuz-2.4.21-37.EL for root device: /dev/hdb6
2006-7-22 5:36:46 [Initrd :: Line 94] Setting up kernel: for root device:
/dev/hdb6
2006-7-22 5:36:46 [Initrd :: Line 94] Setting up kernel: for root device:
/dev/hdb6
2006-7-22 5:36:46 [Initrd :: Line 94] Setting up kernel: for root device:
/dev/hdb6
2006-7-22 5:36:46 [Initrd :: Line 94] Setting up kernel: for root device:
/dev/hdb6
2006-7-22 5:36:46 [Initrd :: Line 94] Setting up kernel: for root device:
/dev/hdb6
2006-7-22 5:36:46 [Initrd :: Line 94] Setting up kernel: for root device:
/dev/hdb6
2006-7-22 5:36:46 [Initrd :: Line 94] Setting up kernel: for root device:
/dev/hdb6
2006-7-22 5:36:46 [Initrd :: Line 94] Setting up kernel: for root device:
/dev/hdb6
2006-7-22 5:36:46 [Boot::YaBoot :: Line 91] YaBoot executable is set to: .
2006-7-22 5:36:46 [Boot :: Line 64] Attempting to setup Boot::YaBoot
2006-7-22 5:36:46 [Boot :: Line 64] Attempting to setup Boot::Iseries
2006-7-22 5:36:46 [Boot :: Line 64] Attempting to setup Boot::EFI
2006-7-22 5:36:46 [Boot :: Line 64] Attempting to setup Boot::Elilo
2006-7-22 5:36:46 [Boot::Lilo :: Line 76] Lilo executable set to: .
2006-7-22 5:36:46 [Boot :: Line 64] Attempting to setup Boot::Lilo
2006-7-22 5:36:46 [Boot::Grub :: Line 102] Grub executable set to:
/sbin/grub-install.
2006-7-22 5:36:46 [Boot :: Line 64] Attempting to setup Boot::Grub
2006-7-22 5:36:46 [Boot::Grub :: Line 123] bootloader = /sbin/grub-install
2006-7-22 5:36:46 [Boot::Grub :: Line 349] Mount = /boot; Path =
/grub/splash.xpm.gz
Probing devices to guess BIOS drives. This may take a long time.
2006-7-22 5:36:46 [Boot::Grub :: Line 245] generated device map file
/tmp/grub.devices
2006-7-22 5:36:46 [Boot::Grub :: Line 253] fd0 => (fd0)
2006-7-22 5:36:46 [Boot::Grub :: Line 253] hdb => (hd0)
2006-7-22 5:36:46 [Boot::Grub :: Line 211] d = /dev/hdb1
2006-7-22 5:36:46 [Boot::Grub :: Line 214] Device: hdb; Part: 1
2006-7-22 5:36:46 [Boot::Grub :: Line 216] Biosdev: (hd0)
2006-7-22 5:36:46 [Boot::Grub :: Line 273] mount: /boot
2006-7-22 5:36:46 [Boot::Grub :: Line 275] mount: /boot mounts: /dev/hdb1
2006-7-22 5:36:46 [Boot::Grub :: Line 211] d = /dev/hdb1
2006-7-22 5:36:46 [Boot::Grub :: Line 214] Device: hdb; Part: 1
2006-7-22 5:36:46 [Boot::Grub :: Line 216] Biosdev: (hd0)
2006-7-22 5:36:46 [Boot::Grub :: Line 349] Mount = /boot; Path =
/vmlinuz-2.4.21-37.ELsmp
2006-7-22 5:36:46 [Boot::Grub :: Line 211] d = /dev/hdb1
2006-7-22 5:36:46 [Boot::Grub :: Line 214] Device: hdb; Part: 1
2006-7-22 5:36:46 [Boot::Grub :: Line 216] Biosdev: (hd0)
2006-7-22 5:36:46 [Boot::Grub :: Line 453]
Kernels:(hd0,0)/vmlinuz-2.4.21-37.ELsmp
2006-7-22 5:36:46 [Boot::Grub :: Line 349] Mount = /boot; Path =
/sc-initrd-2.4.21-37.ELsmp.gz
2006-7-22 5:36:46 [Boot::Grub :: Line 211] d = /dev/hdb1
2006-7-22 5:36:46 [Boot::Grub :: Line 214] Device: hdb; Part: 1
2006-7-22 5:36:46 [Boot::Grub :: Line 216] Biosdev: (hd0)
2006-7-22 5:36:46 [Boot::Grub :: Line 273] mount: /boot
2006-7-22 5:36:46 [Boot::Grub :: Line 275] mount: /boot mounts: /dev/hdb1
2006-7-22 5:36:46 [Boot::Grub :: Line 211] d = /dev/hdb1
2006-7-22 5:36:46 [Boot::Grub :: Line 214] Device: hdb; Part: 1
2006-7-22 5:36:46 [Boot::Grub :: Line 216] Biosdev: (hd0)
2006-7-22 5:36:46 [Boot::Grub :: Line 472] kernel boot section:
partition=(hd0,0) label=2.4.21-37.ELsmp kernel=/vmlinuz-2.4.21-37.ELsmp
initrd=/sc-initrd-2.4.21-37.ELsmp.gz
2006-7-22 5:36:46 [Boot::Grub :: Line 349] Mount = /boot; Path =
/vmlinuz-2.4.21-37.EL
2006-7-22 5:36:46 [Boot::Grub :: Line 211] d = /dev/hdb1
2006-7-22 5:36:46 [Boot::Grub :: Line 214] Device: hdb; Part: 1
2006-7-22 5:36:46 [Boot::Grub :: Line 216] Biosdev: (hd0)
2006-7-22 5:36:46 [Boot::Grub :: Line 453] Kernels:(hd0,0)/vmlinuz-2.4.21-37.EL
2006-7-22 5:36:46 [Boot::Grub :: Line 349] Mount = /boot; Path =
/sc-initrd-2.4.21-37.EL.gz
2006-7-22 5:36:46 [Boot::Grub :: Line 211] d = /dev/hdb1
2006-7-22 5:36:46 [Boot::Grub :: Line 214] Device: hdb; Part: 1
2006-7-22 5:36:46 [Boot::Grub :: Line 216] Biosdev: (hd0)
2006-7-22 5:36:46 [Boot::Grub :: Line 273] mount: /boot
2006-7-22 5:36:46 [Boot::Grub :: Line 275] mount: /boot mounts: /dev/hdb1
2006-7-22 5:36:46 [Boot::Grub :: Line 211] d = /dev/hdb1
2006-7-22 5:36:46 [Boot::Grub :: Line 214] Device: hdb; Part: 1
2006-7-22 5:36:46 [Boot::Grub :: Line 216] Biosdev: (hd0)
2006-7-22 5:36:46 [Boot::Grub :: Line 472] kernel boot section:
partition=(hd0,0) label=2.4.21-37.EL kernel=/vmlinuz-2.4.21-37.EL
initrd=/sc-initrd-2.4.21-37.EL.gz
2006-7-22 5:36:46 [Boot::YaBoot :: Line 91] YaBoot executable is set to: .
2006-7-22 5:36:46 [Boot::Lilo :: Line 76] Lilo executable set to: .
2006-7-22 5:36:46 [Boot::Grub :: Line 102] Grub executable set to:
/sbin/grub-install.
2006-7-22 5:36:46 [Boot::Grub :: Line 123] bootloader = /sbin/grub-install
2006-7-22 5:36:46 [Boot::Grub :: Line 291] mount: /boot
2006-7-22 5:36:46 [Boot::Grub :: Line 310] calling /sbin/grub-install --recheck
/dev/hdb1
Probing devices to guess BIOS drives. This may take a long time.
Installation finished. No error reported.
This is the contents of the device map /boot/grub/device.map.
Check if this is correct or not. If any of the lines is incorrect,
fix it and re-run the script `grub-install'.
(fd0) /dev/fd0
(hd0) /dev/hdb
2006-7-22 5:36:48 [Boot::Grub :: Line 273] mount: /boot
2006-7-22 5:36:48 [Boot::Grub :: Line 275] mount: /boot mounts: /dev/hdb1
2006-7-22 5:36:48 [Boot::Grub :: Line 211] d = /dev/hdb1
2006-7-22 5:36:48 [Boot::Grub :: Line 214] Device: hdb; Part: 1
2006-7-22 5:36:48 [Boot::Grub :: Line 216] Biosdev: (hd0)
Use of uninitialized value in concatenation (.) or string at
/usr/lib/systemconfig/Boot/Grub.pm line 315.
2006-7-22 5:36:48 [Boot::Grub :: Line 315] Installing GRUB! (hd0,0)
2006-7-22 5:36:48 [Boot::Grub :: Line 320] Grub root set to (hd0,0),
bootdev=(hd0)
Probing devices to guess BIOS drives. This may take a long time.
2006-7-22 5:36:48 [main :: Line 463] All done. I have modified the following
files:
/boot/grub/grub.conf
/boot/grub/menu.lst
/boot/sc-initrd-2.4.21-37.EL.gz
/boot/sc-initrd-2.4.21-37.ELsmp.gz
/etc/systemconfig/systemconfig.conf
-------------------------------------------------------------------------
Using Tomcat but need to do more? Need to support web services, security?
Get stuff done quickly with pre-integrated technology to make your job easier
Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo
http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642
_______________________________________________
Oscar-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/oscar-devel
