Hi > I am waiting for solution for the problem i am facing regarding the > eth0 interface of 2 my clients . I haven't been following this problem, but I experienced something similar to what you describe with OPD below.
> Also I am facing problem regarding Ganglia. > As I have the mailing lists postings whinch said that I can download and > install ganglia using OPD. (you can also install ganglia from RPMS downloaded from the ganglia website. you need gmetad, gmond and the webfrontend : ganglia-monitor-core-gmetad-2.5.6-1 ganglia-webfrontend-2.5.5-1 ganglia-monitor-core-gmond-2.5.6-1 These work with RedHat 9 and OSCAR 3.0. you have to edit /etc/gmond.conf) > So I executed the step 0 which is download additional packages. > A window apppears saying Downloading package information. > But nothing appears in the table below I had a timeout until i discovered that my proxy information was not being set properly. OPD uses wget, I think and wget reads the proxy information in ~/.wgetrc. For example, my proxy information is: (from cat ~/.wgetrc) use_proxy = on http_proxy = http://cache.uct.ac.za:8080/ (your proxy here) proxy_user = (your username) proxy_passwd = (your password) good luck. Bruce -- Bruce Becker UCT-CERN Research Center - University of Cape Town Room 405, R.W. James Building, University Avenue North Private Bag RONDEBOSCH 7700 tel :(w) +27 21 650 3356 | (m) +27 82 537 9425 | (f) +27 21 650 3342 WEB :http://hep.phy.uct.ac.za/~becker | AIM : brucellino "Viel hilft viel" ------------------------------------------------------- This SF.Net email sponsored by Black Hat Briefings & Training. Attend Black Hat Briefings & Training, Las Vegas July 24-29 - digital self defense, top technical experts, no vendor pitches, unmatched networking opportunities. Visit www.blackhat.com _______________________________________________ Oscar-users mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/oscar-users
