I had tried that already.  I used "find / -name modprobe.conf" and found the
file in /tmp.  I copied it from /tmp to /etc/.  (Also, the previous
modprobe.conf in /etc was blank!?!?!)

No luck with that change, same issue of "Kernel panic - not syncing:
Attempted to kill init!"

The issue is that same error is still there, so it cannot mount and switch
to the root on the mounted file system.
Mounting root filesystem
mount: error 6 mounting ext3
mount: error 2 mounting none
Switching to new root
switchroot: mount failed: 22
umount /initrd/dev failed:  2
Kernel panic - not syncing: Attempted to kill init!

Also, to clarify from below, the unchanged install from which I used used
linux rescue from built with UYOK.

On Tue, Nov 4, 2008 at 3:16 PM, Michael Edwards <[EMAIL PROTECTED]> wrote:

> Does it boot if you copy the modprobe.conf used by the rescue CD to
> the node file system directly?
>
> On Tue, Nov 4, 2008 at 3:56 PM,  <[EMAIL PROTECTED]> wrote:
> > This situation is very confusing.  When I use the cd and boot into rescue
> > ("linux rescue" from the command prompt of the installer) on a compute
> node
> > that has been imaged (without any if the modifcations that I have tried),
> I
> > can mount the drives and use "chroot /mnt/sysimage" and use the drive
> just
> > fine.  Everything is imaged onto the drive and it looks ready to go...
> >
> > On Tue, Nov 4, 2008 at 2:19 PM, <[EMAIL PROTECTED]> wrote:
> >>
> >> yes, I am still using UYOK.
> >>
> >> On Tue, Nov 4, 2008 at 2:14 PM, Michael Edwards <[EMAIL PROTECTED]>
> >> wrote:
> >>>
> >>> You are still using UYOK for this, right?
>
-------------------------------------------------------------------------
This SF.Net email is sponsored by the Moblin Your Move Developer's challenge
Build the coolest Linux based applications with Moblin SDK & win great prizes
Grand prize is a trip for two to an Open Source event anywhere in the world
http://moblin-contest.org/redirect.php?banner_id=100&url=/
_______________________________________________
Oscar-users mailing list
Oscar-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/oscar-users

Reply via email to