Hi George,
George Ng wrote:
> I have build the OSELA.Toolchain-2011.03.1 and I followed the Quickstart
> Manual to extract the OSELAS.BSP-Pengutronix-Mini2440-2011.09.1.tgz to the
> /home/local, then configure the memory with
>
> $ptxdist select configs/platform-friendlyarm-mini2440/barebox-128m-env/config
The manual states on page 22:
$ ptxdist platform configs/platform-friendlyarm-mini2440/platformconfig-NAND-64M
This file differs from the one you select.
> the error message is
>
> error: Couldn't verify that
> 'configs/platform-friendlyarm-mini2440/barebox-128m-env/config'
> is a valid ptxconfig file.
> If you are absolutely sure, please add '--force'
> to ptxdist's parameters, e.g.:
>
> 'ptxdist --force select
> configs/platform-friendlyarm-mini2440/barebox-128m-env/config
>
> even if I use --force argument I still get the reply of
>
> /home/GeorgeNotebook/local/OSELAS.BSP-Pengutronix-Mini2440-2011.09.1/selected_platformconfig:
> line 45:
> ${eth0.serverip}:/home/${user}/nfsroot/${machine}: bad substitution
Sure. The file you select is a run-time config file for the bootlader
Barebox. ;-)
> The toolchain is 2011.03.1 and the Mini2440-2011.09.1 they are not the same
> version. Do the need to be the same version?
The toolchain still needs the PTXdist-2011.03.x, but the Mini2440-BSP depends
on PTXdist-2011.10.x.
Regards,
Juergen
--
Pengutronix e.K. | Juergen Beisert |
Linux Solutions for Science and Industry | http://www.pengutronix.de/ |
