Dear Juergen,
Thanks for the help. I removed the whole directory
OSELAS.BSP-Pengutronix-Mini2440-2011.09.1 and extract the
OSELAS.BSP-Pengutronix-Mini2440-2011.09.1.tgz again.
[GeorgeNotebook@GeorgeNotebook OSELAS.BSP-Pengutronix-Mini2440-2011.09.1]$
ptxdist platform
configs/platform-friendlyarm-mini2440/platformconfig-NAND-128M
info: selected platformconfig:
'configs/platform-friendlyarm-mini2440/platformconfig-NAND-128M'
found and using toolchain:
'/opt/OSELAS.Toolchain-2011.03.1/arm-v4t-linux-gnueabi/gcc-4.5.2-glibc-2.13-binutils-2.21-kernel-2.6.36-sanitized/bin'
What is the command for selecting the LCD?
Best Regards
George
On Mon, Oct 24, 2011 at 5:08 PM, Juergen Beisert <[email protected]> wrote:
> Hi George,
>
> George Ng wrote:
> > The Manual that I was using was Rev. 1596/479 and I was following to the
> > wrong direction. But even I tried with the suggested command
> >
> > [...]
> >
> > I still don't get the platform configuration set correctly. Do I have to
> > install the OSELA.Toolchain and the ptxdist to 2011.09.1 version?
>
> Just read my other mail. PTXdist remembers some things via "symbolic
> links".
> These "symbolic links" are your problem here, because they still point to
> the
> wrong config file. Remove them and start from the beginning again.
>
> Regards,
> Juergen
>
> --
> Pengutronix e.K. | Juergen Beisert
> |
> Linux Solutions for Science and Industry | http://www.pengutronix.de/ |
>
