Dear Juergen, The default setting in 128M config file is
bootargs="console=ttySAC0,115200 mini2440=0tbc" This is the LCD setting for the Mini2440, isn't it? Now, if my host is not connect to the Network, I mean if my project is build in a isolated computer, Do I still have to do the Network setting as mentioned in section 4.2.2 and 4.2.2.1 of the QuickStart Manual? Regards George On Mon, Oct 24, 2011 at 6:10 PM, Juergen Beisert <[email protected]> wrote: > Hi George, > > George Ng wrote: > > Thanks for the help. I removed the whole directory > > OSELAS.BSP-Pengutronix-Mini2440-2011.09.1 and extract the > > OSELAS.BSP-Pengutronix-Mini2440-2011.09.1.tgz again. > > > > > > [georgenoteb...@georgenotebookoselas.bsp-Pengutronix-Mini2440-2011.09.1]$ > > ptxdist platform > > configs/platform-friendlyarm-mini2440/platformconfig-NAND-128M > > info: selected platformconfig: > > 'configs/platform-friendlyarm-mini2440/platformconfig-NAND-128M' > > > > found and using toolchain: > > > '/opt/OSELAS.Toolchain-2011.03.1/arm-v4t-linux-gnueabi/gcc-4.5.2-glibc-2.13 > >-binutils-2.21-kernel-2.6.36-sanitized/bin' > > > > What is the command for selecting the LCD? > > Did you really read the manual? Refer section 4.2. (mostly 4.2.3). > > Regards, > Juergen > > -- > Pengutronix e.K. | Juergen Beisert > | > Linux Solutions for Science and Industry | http://www.pengutronix.de/ | >
