Dear Juergen,
The Manual that I was using was Rev. 1596/479 and I was following to the
wrong direction. But even I tried with the suggested command
[GeorgeNotebook@GeorgeNotebook OSELAS.BSP-Pengutronix-Mini2440-2011.09.1]$
ptxdist platform
configs/platform-friendlyarm-mini2440/platformconfig-NAND-128M
/home/GeorgeNotebook/local/OSELAS.BSP-Pengutronix-Mini2440-2011.09.1/selected_platformconfig:
line 45: ${eth0.serverip}:/home/${user}/nfsroot/${machine}: bad substitution
/home/GeorgeNotebook/local/OSELAS.BSP-Pengutronix-Mini2440-2011.09.1/selected_platformconfig:
line 45: ${eth0.serverip}:/home/${user}/nfsroot/${machine}: bad substitution
/home/GeorgeNotebook/local/OSELAS.BSP-Pengutronix-Mini2440-2011.09.1/selected_platformconfig:
line 45: ${eth0.serverip}:/home/${user}/nfsroot/${machine}: bad substitution
/home/GeorgeNotebook/local/OSELAS.BSP-Pengutronix-Mini2440-2011.09.1/selected_platformconfig:
line 45: ${eth0.serverip}:/home/${user}/nfsroot/${machine}: bad substitution
/home/GeorgeNotebook/local/OSELAS.BSP-Pengutronix-Mini2440-2011.09.1/selected_platformconfig:
line 45: ${eth0.serverip}:/home/${user}/nfsroot/${machine}: bad substitution
/home/GeorgeNotebook/local/OSELAS.BSP-Pengutronix-Mini2440-2011.09.1/selected_platformconfig:
line 45: ${eth0.serverip}:/home/${user}/nfsroot/${machine}: bad substitution
/home/GeorgeNotebook/local/OSELAS.BSP-Pengutronix-Mini2440-2011.09.1/selected_platformconfig:
line 45: ${eth0.serverip}:/home/${user}/nfsroot/${machine}: bad substitution
/home/GeorgeNotebook/local/OSELAS.BSP-Pengutronix-Mini2440-2011.09.1/selected_platformconfig:
line 45: ${eth0.serverip}:/home/${user}/nfsroot/${machine}: bad substitution
info: selected platformconfig:
'configs/platform-friendlyarm-mini2440/platformconfig-NAND-128M'
I still don't get the platform configuration set correctly. Do I have to
install the OSELA.Toolchain and the ptxdist to 2011.09.1 version?
Best Regards
George
On Mon, Oct 24, 2011 at 4:12 PM, Juergen Beisert <[email protected]> wrote:
> Hi George,
>
> George Ng wrote:
> > I have build the OSELA.Toolchain-2011.03.1 and I followed the Quickstart
> > Manual to extract the OSELAS.BSP-Pengutronix-Mini2440-2011.09.1.tgz to
> the
> > /home/local, then configure the memory with
> >
> > $ptxdist select
> configs/platform-friendlyarm-mini2440/barebox-128m-env/config
>
> The manual states on page 22:
>
> $ ptxdist platform
> configs/platform-friendlyarm-mini2440/platformconfig-NAND-64M
>
> This file differs from the one you select.
>
> > the error message is
> >
> > error: Couldn't verify that
> > 'configs/platform-friendlyarm-mini2440/barebox-128m-env/config'
> > is a valid ptxconfig file.
> > If you are absolutely sure, please add '--force'
> > to ptxdist's parameters, e.g.:
> >
> > 'ptxdist --force select
> > configs/platform-friendlyarm-mini2440/barebox-128m-env/config
> >
> > even if I use --force argument I still get the reply of
> >
> >
> /home/GeorgeNotebook/local/OSELAS.BSP-Pengutronix-Mini2440-2011.09.1/selected_platformconfig:
> line 45:
> > ${eth0.serverip}:/home/${user}/nfsroot/${machine}: bad substitution
>
> Sure. The file you select is a run-time config file for the bootlader
> Barebox. ;-)
>
> > The toolchain is 2011.03.1 and the Mini2440-2011.09.1 they are not the
> same
> > version. Do the need to be the same version?
>
> The toolchain still needs the PTXdist-2011.03.x, but the Mini2440-BSP
> depends
> on PTXdist-2011.10.x.
>
> Regards,
> Juergen
>
> --
> Pengutronix e.K. | Juergen Beisert
> |
> Linux Solutions for Science and Industry | http://www.pengutronix.de/ |
>
