Hi,
I did another test and the output with default settings is (NOTICE):
ViewerBase::configureAffinity() numProcessors=8
databasePagers = 1
_forceVertexArrayObject = 0
_forceVertexBufferObject = 0
Warning: detected OpenGL error 'invalid operation' at after
RenderBin::draw(..)
Warning: detected OpenGL error 'invalid operation' at after
RenderBin::draw(..)
Warning: detected OpenGL error 'invalid operation' at after
RenderBin::draw(..)
Warning: detected OpenGL error 'invalid operation' at after
RenderBin::draw(..)
<constantly same lines>
Setting OSG_GL_ERROR_CHECKING=OSG_GL_ERROR_CHECKING does not make a
difference in output.
Setting OSG_NOTIFY_LEVEL to INFO reveals this part that might be
interesting:
Created new 0x7fdf1b714510 TextureObject, _numOfTextureObjects 1
OpenGL extension '' is not supported.
RenderStage::runCameraSetUp(osg::RenderInfo& renderInfo) 0x7fdf1b712660
Setting up osg::Camera::FRAME_BUFFER
Warning: detected OpenGL error 'invalid operation' at after
RenderBin::draw(..)
ShaderComposer::~ShaderComposer() 0x7fdf1b40dd80
OpenGL extension '' is not supported.
RenderStage::runCameraSetUp(osg::RenderInfo& renderInfo) 0x7fdf1b40ecd0
Setting up osg::Camera::FRAME_BUFFER
Warning: detected OpenGL error 'invalid operation' at after
RenderBin::draw(..)
Warning: detected OpenGL error 'invalid operation' at after
RenderBin::draw(..)
Warning: detected OpenGL error 'invalid operation' at after
RenderBin::draw(..)
Warning: detected OpenGL error 'invalid operation' at after
RenderBin::draw(..)
Cheers, hth,
Raymond
On 14-10-2016 13:51, Raymond de Vries wrote:
Hi Robert,
Yes, indeed, that's the OpenGL error. I have build the same version on
Windows (nvidia card) and no such error so I am not sure of course if
it has to do with OSX or not.
The last version that I checked was 3.5.4 and that one doesn't produce
the errors. Indeed, I tested it explicitly because of the VAO changes.
Later, I will produce more results and post them.
Regards,
Raymond
On 10/14/2016 1:35 PM, Robert Osfield wrote:
Hi Raymond,
Thanks for the logs, unfortunately the debug logs actually make it
more difficult to spot the actual errors. The only error I spotted
was:
Warning: detected OpenGL error 'invalid operation' at after
RenderBin::draw(..)
Is this the error you are thinking of?
Could you set the OSG_NOTIFY_LEVEL back to NOTICE and the env
OSG_GL_ERROR_CHECKING env var to ONCE_PER_ATTRIBUTE
This hopefully will enable us to home in a bit more closely to what
might be causing the GL error.
Another useful bit of information is the last OSG version that doesn't
report the above error on our system. It could be that the cause of
the GL error precedes the VAO work.
Cheers,
Robert.
On 14 October 2016 at 11:13, Raymond de Vries <[email protected]> wrote:
Hi Robert,
I just tried a build from this mornings git master on my Mac book
(up to
date OSX and dependencies) and both the default and VAO paths result in
OpenGL errors. I have attached 2 (stripped) logs which I created
after I
increased the notify level. Rendering results of cow, cessna and
some other
models look ok.
I was going to try gdebugger but that one is not available anymore?!
If you
have some hints to produce more info I am happy to test some more.
Cheers
Raymond
_______________________________________________
osg-users mailing list
[email protected]
http://lists.openscenegraph.org/listinfo.cgi/osg-users-openscenegraph.org
_______________________________________________
osg-users mailing list
[email protected]
http://lists.openscenegraph.org/listinfo.cgi/osg-users-openscenegraph.org
_______________________________________________
osg-users mailing list
[email protected]
http://lists.openscenegraph.org/listinfo.cgi/osg-users-openscenegraph.org
_______________________________________________
osg-users mailing list
[email protected]
http://lists.openscenegraph.org/listinfo.cgi/osg-users-openscenegraph.org
