I tried some voltage sensing with DS2781K Maxim chip, which is connected
to a DS9097 serial adapter through RJ11. I\'ve installed all necessary
software, but not been able to pull out any information from the mounted
directory (/mnt/1wire). My laptop\'s serial port is set to baud rate
9600. Here is what I did: owfs -d /dev/ttyS0 /mnt/1wire. This
command does not give any error, and only creates a 1wire directory, where I
can see subdirectories: bus.0, settings, structure, statistics, system, and
uncached. Even \"cat /dev/ttyS0\" does not show any information on ttyS0
port. So, I am at a loss ... Is DS2781K a owfs supported device ... or am
I missing something? .... Any help will be helpful.
-------------------------------------------------------------------------
This SF.net email is sponsored by: Microsoft
Defy all challenges. Microsoft(R) Visual Studio 2005.
http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/
_______________________________________________
Owfs-developers mailing list
Owfs-developers@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/owfs-developers
