njh, just tried local echoing by shorting Tx and Rx with 9-25 converter ... works fine.
So, /dev/ttyS0 is OK. ---- njh-2 wrote: > > On Sat, 15 Sep 2007, suman- wrote: > >> Any suggestion why am I not getting any info? > > I don't see any problems with your layout, a quick check to make sure you > have the serial port working is to stick a wire connecting pins 2 and 3. > Then in serialport tool of choice (gtkterm is reasonable) turn off flow > control and see if you get echo through the port (everything you type > comes back). IF that works, pull out the wire and see if it stops > working. repeat until happy. > > That will at least prove the port works. Do this with the 9-25 converter. > I've had problems with those converters in the past, never could work out > why :( > > njh > > ------------------------------------------------------------------------- > This SF.net email is sponsored by: Microsoft > Defy all challenges. Microsoft(R) Visual Studio 2005. > http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/ > _______________________________________________ > Owfs-developers mailing list > Owfs-developers@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/owfs-developers > > -- View this message in context: http://www.nabble.com/Re%3A-MIPS-vs-MIPSEL-in-OWFS-tf4446090.html#a12696939 Sent from the OWFS - Dev mailing list archive at Nabble.com. ------------------------------------------------------------------------- This SF.net email is sponsored by: Microsoft Defy all challenges. Microsoft(R) Visual Studio 2005. http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/ _______________________________________________ Owfs-developers mailing list Owfs-developers@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/owfs-developers
