On Wed, Mar 02, 2011 at 09:59:45AM -0500, Eloy Paris wrote:

> I like the idea of covering the sensor (or parts of the sensor and the 
> PCB) with silicone. Do you remember what specific product you used (was 
> it a spray, or just one of those tubes you buy at HomeDepot or Lowe's 
> that you apply with a gun)?

You can use caulking silicone, but be warned that many are cured by
acetic acid, which reacts readily with copper (to form verdigris as it
happens).  The standard approach at a former workplace was to put some
neutral cure silicone in a heatshrink tube with the wire, and heat
shrink it to force the silicone into all the gaps.

exterior urethane caulks might be a better choice, though I have no
experience with them personally.  They are solvent cured (and thus
stink).

Wax is intriguing, and there are non-curing water sealing compounds
available too (I use one, tacgel, for stopping ants climbing fruit
trees - even after 5 years outside it's still water repelling and tacky)

njh

------------------------------------------------------------------------------
Free Software Download: Index, Search & Analyze Logs and other IT data in 
Real-Time with Splunk. Collect, index and harness all the fast moving IT data 
generated by your applications, servers and devices whether physical, virtual
or in the cloud. Deliver compliance at lower cost and gain new business 
insights. http://p.sf.net/sfu/splunk-dev2dev 
_______________________________________________
Owfs-developers mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/owfs-developers

Reply via email to