Hi Chris, On 03/11/2012 09:47 AM, Chris Lautre wrote:
> Hi > > A while ago I saw some discussion about a Vibration sensor. > I have found an adjustable one that works great: http://www.assemtech.co.uk/ > There are 2 models NPN(PDS1000-1) and PNP(PDS1000-2) output. > They are about 40 GBP. > > I have the circuit below working fine. > The DS2406 reads the Relay open/close. > I know there must be a way of reading the output without using the relay. > (My circuit design knowledge is a bit limited to say the least) > Can anyone suggest a suitable circuit? Why not connect the sensor's output directly to the DS2406 PIOA input? Is the concern that the sensor's output is 0V or 12V and the DS2406 can operate in the 0 to 5V range? The DS2406 datasheet says that the PIOA pin can take up to 12 volts. Cheers, Eloy Paris.- ------------------------------------------------------------------------------ Virtualization & Cloud Management Using Capacity Planning Cloud computing makes use of virtualization - but cloud computing also focuses on allowing computing to be delivered as a service. http://www.accelacomm.com/jaw/sfnl/114/51521223/ _______________________________________________ Owfs-developers mailing list Owfs-developers@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/owfs-developers
