How would I probe? The compartments are sealed. Whatever solution I finally
adopt there will be at least two wires from each bilge compartment leading
to the areas above the floor (deck). The wires will be sealed so that they
don't provide a passage for water.

If anyone is interested, here is our project:
http://www.hbeck.net/pics/projects/skipjack/skipjack.html

The implementation of the moisture sensing solution will probably be in
September or October, after the boat is turned upright and we begin work on
the interior.

OWFS is a great project. I use three RPis to drive three 1wire sensors, a
Davis weather station and three still webcams,
Thanks very much to everyone.
Peter




On Sun, Jul 7, 2013 at 1:10 PM, Colin Law <clan...@googlemail.com> wrote:

> On 7 July 2013 21:05, Peter Hollenbeck <pwhb...@gmail.com> wrote:
> > Elegant solution. Would I need a computer? Could I just do it with a
> > multimeter? I love my Raspberry Pis but maybe one isn't required in this
> > case.
>
> Would you be better just with a cheap moisture meter [eg 1] and probe
> it from the outside occasionally, as if the inside of the chanber is
> wet then presumably some of this would soak through and make the wood
> damp.
>
> [1]
> http://www.amazon.co.uk/Handheld-Wood-Moisture-Meter-MD-812/dp/B00118SL6A
>
> Colin
>
>
> ------------------------------------------------------------------------------
> This SF.net email is sponsored by Windows:
>
> Build for Windows Store.
>
> http://p.sf.net/sfu/windows-dev2dev
> _______________________________________________
> Owfs-developers mailing list
> Owfs-developers@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/owfs-developers
>
------------------------------------------------------------------------------
This SF.net email is sponsored by Windows:

Build for Windows Store.

http://p.sf.net/sfu/windows-dev2dev
_______________________________________________
Owfs-developers mailing list
Owfs-developers@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/owfs-developers

Reply via email to