Andrew,
The results of my show snmp-server are
SNMP Communities
Community Name MIB View Write Access
---------------- -------- ------------
public Manager Unrestricted
Trap Receivers
Link-Change Traps Enabled on Ports [All] : None
Send Authentication Traps [No] : No
Address Community Events Sent in Trap
---------------------- ---------------- -------------------
192.168.1.5 public Not-INFO
This seems to match what you said I should see.
Wikus,
I don't see any config for SNMP in my pf.conf.
In the switches.conf, there are some SNMP settings for Packetfence as well
well as my Procurve 2524.
Is this where I need to make the changes, and if so what changes would I
need to make?
Here is the procurve entry from switches.conf I don't see a line for SNMP
community read
type=HP::Procurve_2500
uplink=1
cliUser=XXXXXXXX
cliPwd=XXXXXXXX
wsUser=XXXXXXXX
wsPwd=XXXXXXXX
controllerIp=
SNMPUserNameTrap=
SNMPAuthProtocolTrap=
SNMPAuthPasswordTrap=
SNMPPrivProtocolTrap=
SNMPPrivPasswordTrap=
SNMPCommunityWrite=public
SNMPEngineID=
SNMPUserNameRead=
SNMPAuthProtocolRead=
SNMPAuthPasswordRead=
SNMPPrivProtocolRead=
SNMPPrivPasswordRead=
SNMPUserNameWrite=
SNMPAuthProtocolWrite=
SNMPAuthPasswordWrite=
SNMPPrivProtocolWrite=
SNMPPrivPasswordWrite=
mode=production
SNMPVersionTrap=2c
SNMPVersion=2c
#SNMPVersion = 3
#SNMPEngineID = 0000000000000
#SNMPUserNameRead = readUser
#SNMPAuthProtocolRead = MD5
#SNMPAuthPasswordRead = authpwdread
#SNMPPrivProtocolRead = DES
#SNMPPrivPasswordRead = privpwdread
#SNMPUserNameWrite = writeUser
#SNMPAuthProtocolWrite = MD5
#SNMPAuthPasswordWrite = authpwdwrite
#SNMPPrivProtocolWrite = DES
#SNMPPrivPasswordWrite = privpwdwrite
#SNMPVersionTrap = 3
#SNMPUserNameTrap = readUser
#SNMPAuthProtocolTrap = MD5
#SNMPAuthPasswordTrap = authpwdread
#SNMPPrivProtocolTrap = DES
#SNMPPrivPasswordTrap = privpwdread
>> Hi, there is a config for readin snmp and a config for writing snmp. I
only
>> did the config for the reading part. Sorry Iím also new to packetfence
and
>> donít know how to explain it any better.
>>
>> You need to ensure that packetfence knows how to read snmp from your
switch
>> and how to write to your switch. The config for read and write are in
PATTONVILLE SCHOOL DISTRICT CONFIDENTIALITY NOTICE AND DISCLAIMER: This
email and any attachments may be confidential and may contain privileged
or copyright information. Any unauthorized use, disclosure, or
distribution is prohibited and may be unlawful. If you are not the
intended recipient or a person responsible for delivering this message
to the intended recipient(s), please call (314) 213-8050 and reply to
sender to inform us that you have received this message in error and
destroy all copies of the original message. Please do not copy,
distribute or use this email or the information contained in it for any
purpose without permission of the sender.
Computer viruses can be transmitted via email. The district has taken
reasonable precautions to ensure no viruses are present in this email;
however, we cannot accept responsibility for any loss or damage arising
from the use of this email or attachments.
------------------------------------------------------------------------------
The demand for IT networking professionals continues to grow, and the
demand for specialized networking skills is growing even more rapidly.
Take a complimentary Learning@Cisco Self-Assessment and learn
about Cisco certifications, training, and career opportunities.
http://p.sf.net/sfu/cisco-dev2dev
_______________________________________________
Packetfence-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/packetfence-users
