Hi, > Do you send the traps to the management interface? > No. then that would explain it. Since my setup is in the lab, I was > using the management to access packetfence on a live network, but > everything else in a lab environment. I can adjust and try that. Thank you. Yea, this is mandatory :)
> > What IOS version are you using? Can you also post the actual int > configuration snippet? > > System image file is "flash:c2960-lanlitek9-mz.122-52.SE.bin" > > TestSwitch#sho run int f0/2 > Building configuration... > > Current configuration : 291 bytes > ! > interface FastEthernet0/2 > switchport access vlan 4 > switchport mode access > switchport port-security maximum 1 vlan access > switchport port-security > switchport port-security violation restrict > switchport port-security mac-address 0200.0001.1001 vlan access > spanning-tree portfast > end Config looks OK. I don't know about SNMP community strings tho, maybe you can review. We recommend running IOS 12.2(58) as the firmware. Can you upgrade and see if it resolves the issue? Thanks! -- Francois Gaudreault, ing. jr [email protected] :: +1.514.447.4918 (x130) :: www.inverse.ca Inverse inc. :: Leaders behind SOGo (www.sogo.nu) and PacketFence (www.packetfence.org) ------------------------------------------------------------------------------ Everyone hates slow websites. So do we. Make your web apps faster with AppDynamics Download AppDynamics Lite for free today: http://p.sf.net/sfu/appdyn_sfd2d_oct _______________________________________________ PacketFence-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/packetfence-users
