Did you forget to add:
snmp-server community public RO
snmp-server community private RW
Regards
Le 2012-10-26 14:08, chris williams a écrit :
I have upgraded the code to "c2960-lanlitek9-mz.122-58.SE2.bin" and
still see the same thing in the packetfence.log;
Oct 26 13:56:58 pfsetvlan(21) INFO: secureMacAddrViolation trap on
192.168.10.1 ifIndex 10002. Port Security is no longer configured on
the port. Flush the trap (main::signalHandlerTrapListQueued)
As far as SNMP commuity strings. Everything appears to be setup
correctly, here is my switch
[192.168.10.1]
type=Cisco::Catalyst_2960
mode=production
uplink=1
cliTransport=Telnet
cliUser=cisco
cliPwd=cisco
cliEnablePwd=cisco
SNMPVersionTrap=2c
SNMPCommunityTrap=public
and here is my switch configs:
TestSwitch#sho run | i snmp
snmp-server enable traps port-security
snmp-server enable traps port-security trap-rate 1
snmp-server host 192.168.10.5 version 2c public port-security
Not sure where else to go here.....
Thanks!
cwilli
On Fri, Oct 26, 2012 at 10:57 AM, Francois Gaudreault
<[email protected] <mailto:[email protected]>> wrote:
Hi,
> Do you send the traps to the management interface?
> No. then that would explain it. Since my setup is in the lab, I was
> using the management to access packetfence on a live network, but
> everything else in a lab environment. I can adjust and try that.
Thank you.
Yea, this is mandatory :)
>
> What IOS version are you using? Can you also post the actual int
> configuration snippet?
>
> System image file is "flash:c2960-lanlitek9-mz.122-52.SE.bin"
>
> TestSwitch#sho run int f0/2
> Building configuration...
>
> Current configuration : 291 bytes
> !
> interface FastEthernet0/2
> switchport access vlan 4
> switchport mode access
> switchport port-security maximum 1 vlan access
> switchport port-security
> switchport port-security violation restrict
> switchport port-security mac-address 0200.0001.1001 vlan access
> spanning-tree portfast
> end
Config looks OK. I don't know about SNMP community strings tho, maybe
you can review. We recommend running IOS 12.2(58) as the
firmware. Can
you upgrade and see if it resolves the issue?
Thanks!
--
Francois Gaudreault, ing. jr
[email protected] <mailto:[email protected]> ::
+1.514.447.4918 <tel:%2B1.514.447.4918> (x130) :: www.inverse.ca
<http://www.inverse.ca>
Inverse inc. :: Leaders behind SOGo (www.sogo.nu
<http://www.sogo.nu>) and PacketFence
(www.packetfence.org <http://www.packetfence.org>)
------------------------------------------------------------------------------
Everyone hates slow websites. So do we.
Make your web apps faster with AppDynamics
Download AppDynamics Lite for free today:
http://p.sf.net/sfu/appdyn_sfd2d_oct
_______________________________________________
PacketFence-users mailing list
[email protected]
<mailto:[email protected]>
https://lists.sourceforge.net/lists/listinfo/packetfence-users
------------------------------------------------------------------------------
The Windows 8 Center
In partnership with Sourceforge
Your idea - your app - 30 days. Get started!
http://windows8center.sourceforge.net/
what-html-developers-need-to-know-about-coding-windows-8-metro-style-apps/
_______________________________________________
PacketFence-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/packetfence-users
--
Fabrice Durand
[email protected] :: +1.514.447.4918 (x135) :: www.inverse.ca
Inverse inc. :: Leaders behind SOGo (http://www.sogo.nu) and PacketFence
(http://packetfence.org)
------------------------------------------------------------------------------
The Windows 8 Center
In partnership with Sourceforge
Your idea - your app - 30 days. Get started!
http://windows8center.sourceforge.net/
what-html-developers-need-to-know-about-coding-windows-8-metro-style-apps/
_______________________________________________
PacketFence-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/packetfence-users
