Hi Frisvold,
Thank u hat seemed to be the issue. I set the management ip of the server and there were logs been generated from the snmptrapd.log. Could u advise me 1) if its appropriate to have mac detection vlan same as isolation vlan. 2)what vlan should be set on the access port before plugging in the computer ------------------------------ On Tue, Jul 2, 2013 10:02 AM PDT Jason Frisvold wrote: >frank muriuki wrote: >> Hi All, >> >> I have a challenge establishing communication between Cisco 2960 switch >> with the PacketFence. I have tried V1 and V2 but i get this error; >> >> ECS-ASW-FL1#sh run | i snmp >> snmp-server community Pass123$ RW 10 > >The 10 after RW indicates that you're using an access list. Does access >list 10 include the IP address of your packetfence server? Specifically >the management IP? > >-- >--------------------------- >Jason 'XenoPhage' Frisvold >[email protected] >--------------------------- > >"Any sufficiently advanced magic is indistinguishable from technology.\" >- Niven's Inverse of Clarke's Third Law > >------------------------------------------------------------------------------ >This SF.net email is sponsored by Windows: > >Build for Windows Store. > >http://p.sf.net/sfu/windows-dev2dev >_______________________________________________ >PacketFence-users mailing list >[email protected] >https://lists.sourceforge.net/lists/listinfo/packetfence-users ------------------------------------------------------------------------------ This SF.net email is sponsored by Windows: Build for Windows Store. http://p.sf.net/sfu/windows-dev2dev _______________________________________________ PacketFence-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/packetfence-users
