frank muriuki wrote: > Hi, i used the following snmpwalk command but still doesn't work. > > snmp -v 2c -c Pass123 10.2.1.20 > error. Timeout: No response from 10.2.1.20 > > where 10.2.1.20 is Switch IP.
This is not a packetfence problem, this is a networking problem. My guess would be that you have an access list on your switch that is preventing the packetfence server from getting to the switch for SNMP. >From the config you previously posted, you have access-list 10 assigned to the SNMP community you're using. Is the IP of the packetfence server in that access list? > One more thing is it appropriate to set one vlan for Mac detection & > Isolation? I don't believe Packetfence works this way. I just created a fake VLAN for isolation. > Regards, > Frank -- --------------------------- Jason 'XenoPhage' Frisvold [email protected] --------------------------- "Any sufficiently advanced magic is indistinguishable from technology.\" - Niven's Inverse of Clarke's Third Law ------------------------------------------------------------------------------ This SF.net email is sponsored by Windows: Build for Windows Store. http://p.sf.net/sfu/windows-dev2dev _______________________________________________ PacketFence-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/packetfence-users
