Aaron,
I tried a null modem prior to sending my first email. It didn't work that
way either. It did allow the TX and RX to be lined up correctly, but there
evidently was some other pins still not right....probably RTS/CTS. Thanks
for the input though!
I am going to order the Modem cable from Palm and go that way.
Very truly yours,
Rob G.
----------
From: Aaron Ardiri <[EMAIL PROTECTED]>
To: [EMAIL PROTECTED]
Subject: Re: Modem Hotsync
Date: Friday, October 22, 1999 1:59 AM
> You need adapter, that propose signals like this:
>
> DB9 (palm serial) = DB25 (modem)
> pin2 = pin2
> pin3 = pin3
> pin5 = pin7
> pin6 = pin20
> pin7 = pin5
> pin8 = pin4
>
> Read more: http://www.palm.com/devzone/hw.html
which is also known as a "null modem" - you should be able to
purchase an adapter from a common computer hardware store.
az.
--
Aaron Ardiri
Lecturer http://www.hig.se/~ardiri/
University-College i G�vle mailto:[EMAIL PROTECTED]
SE 801 76 G�vle SWEDEN
Tel: +46 26 64 87 38 Fax: +46 26 64 87 88
Mob: +46 70 656 1143 A/H: +46 26 10 16 11
----------
