> I think the electronics was in the Visor connector end.. Some were some weren't. We used to stock ones that had it in the visor end. The current ones we stock have the electronics in the DB9 end.
> So what you'd want is a cable with the Athena on one end, and a female Visor > on the other to mate with the existing Visor cable. Or remove the electronics > and fit into your Athena conector. I don't have a clue what you are talking about. You cut off the visor end and put the Athena connector on wired properly to the TTL level RS232 signal. Done. > But again different connectors. (Min-USB vs UC vs Athena vs Clie vs Visor, > etc) Ehh, but they all eventually plug into a standard PC type USB port, so as I stated before, I wish there was something more universal. i.e. something that had a PC type USB port and a DB9 on it. Every Palm that handles USB has a cable that goes from whatever connector is on the Palm to a standard USB connector readily available. So there are no cabling issues as far as getting the signals to whatever is going to convert the USB signals to serial. Now how about getting back on the topic of *solutions*... -Mike -- For information on using the Palm Developer Forums, or to unsubscribe, please see http://www.palmos.com/dev/support/forums/
