in my seeing it, its ok to use either measurement, I think most of us in the US can use either one, and those that are not sure her is a simple formula to convert mm to inches, take mm devide by 25.4 and you get inches
--- On Thu, 2/25/10, cyana <[email protected]> wrote: From: cyana <[email protected]> Subject: [Papermodels II 41985] Question to American modellers To: "Papermodels II" <[email protected]> Date: Thursday, February 25, 2010, 5:22 PM Dear modeller mates, in my paper model kit, I want to give the instruction to cut a 48 mm x 27 mm sized rectangle from tissue paper. My question is - is it still common in US and CAN to give such an instruction with Imperial dimensions (inch ?). And if yes, is it more common to say, the size of the rectangle should be 1.9" x 1.1" (approx.) or 1-7/8" x 1-1/16" ? many thanks in advance ! Cyana from MicroArtwork -- You received this message because you are subscribed to the Google Groups "Papermodels II" group. To post to this group, send email to [email protected]. To unsubscribe from this group, send email to [email protected]. For more options, visit this group at http://groups.google.com/group/papermodels?hl=en. -- You received this message because you are subscribed to the Google Groups "Papermodels II" group. To post to this group, send email to [email protected]. To unsubscribe from this group, send email to [email protected]. For more options, visit this group at http://groups.google.com/group/papermodels?hl=en.
