Hello, Cyana: I would think either would be fine, but if you use inches I would suggest 1-7/8" x 1-1/16", rather than the decimal number, to make it easier for the modeler to measure using a common ruler.
Cheers! Jim -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of cyana Sent: Thursday, February 25, 2010 5:22 PM To: Papermodels II Subject: [Papermodels II 41985] Question to American modellers Dear modeller mates, in my paper model kit, I want to give the instruction to cut a 48 mm x 27 mm sized rectangle from tissue paper. My question is - is it still common in US and CAN to give such an instruction with Imperial dimensions (inch ?). And if yes, is it more common to say, the size of the rectangle should be 1.9" x 1.1" (approx.) or 1-7/8" x 1-1/16" ? many thanks in advance ! Cyana from MicroArtwork -- You received this message because you are subscribed to the Google Groups "Papermodels II" group. To post to this group, send email to [email protected]. To unsubscribe from this group, send email to [email protected]. For more options, visit this group at http://groups.google.com/group/papermodels?hl=en. -- You received this message because you are subscribed to the Google Groups "Papermodels II" group. To post to this group, send email to [email protected]. To unsubscribe from this group, send email to [email protected]. For more options, visit this group at http://groups.google.com/group/papermodels?hl=en.
