i wonder if you tried a different cpu speed (switches 9-12) if you could
then get that bus speed. e.g., the carrier comes defaulted with 9 and 10
"on". what if you turned "11" on to get a higher ratio. you could then
attain a higher bus while not blowing the cache speed out.
vora
-----Original Message-----
From: PCI PowerMacs [mailto:[EMAIL PROTECTED]]On Behalf
Of Terry Mathews
Sent: Thursday, August 16, 2001 4:26 PM
To: PCI PowerMacs
Subject: Re: 9600 overclocking
Basically, nothing happens. The machine won't boot at 60MHz. I'd have to
take a look at the machine to see what the switch settings are, I keep it at
work.
Terry
> what happens around 60? it starts freaking out? modal dialog boxes with no
> buttons? bombs? you ARE running at 59.5? what are you setting switches
9-12
> at?
--
PCI-PowerMacs is sponsored by <http://lowendmac.com/> and...
Small Dog Electronics http://www.smalldog.com | Refurbished Drives |
- Epson Stylus Color 740 Printers refurbished $79 | & CDRWs on Sale! |
Support Low End Mac <http://lowendmac.com/lists/support.html>
PCI-PowerMacs list info: <http://lowendmac.com/lists/pci-powermacs.shtml>
Send list messages to: <mailto:[EMAIL PROTECTED]>
To unsubscribe, email: <mailto:[EMAIL PROTECTED]>
For digest mode, email: <mailto:[EMAIL PROTECTED]>
Subscription questions: <mailto:[EMAIL PROTECTED]>
Archive:<http://www.mail-archive.com/pci-powermacs%40mail.maclaunch.com/>
Using a Macintosh? Get free email and more at Applelinks!
<http://www.applelinks.com>
