Hi all, I've recently bought a second HDD SCSI (nude) for my PowerMac 7500 : I've bought a Power cable doubler for this HDD and a second SCSI bus.
First question : For the HDD itself, in the second bay, there is just the two bars supporting, i suppose, a plastic chassis for the HDD. This chassis, i don't have it. Need i find this specific chassis (or perhaps is it standard) or is there another means to fix this second drive in the bay. Second question, relative to MacOS (9.1) detection of the second HDD : I've just plugged this second HDD for testing it and initializing it. This HDD has been plugged on the second SCSI (1) slot with my bus. When i check the system information, i see for SCSI 1, on scsi ID 6 a CD ROM but not an HDD. Someone of you already had this problem? Thanks for your help. Laurent __________________________________________________ Do You Yahoo!? Yahoo! - Official partner of 2002 FIFA World Cup http://fifaworldcup.yahoo.com -- PCI-PowerMacs is sponsored by <http://lowendmac.com/> and... Small Dog Electronics http://www.smalldog.com | Refurbished Drives | -- Sonnet & PowerLogix Upgrades - start at $169 | & CDRWs on Sale! | Support Low End Mac <http://lowendmac.com/lists/support.html> PCI-PowerMacs list info: <http://lowendmac.com/lists/pci-powermacs.shtml> --> AOL users, remove "mailto:"; Send list messages to: <mailto:[EMAIL PROTECTED]> To unsubscribe, email: <mailto:[EMAIL PROTECTED]> For digest mode, email: <mailto:[EMAIL PROTECTED]> Subscription questions: <mailto:[EMAIL PROTECTED]> Archive:<http://www.mail-archive.com/pci-powermacs%40mail.maclaunch.com/> Using a Mac? Free email & more at Applelinks! http://www.applelinks.com
