Looking around inside the 7600 I am prompted to inquire. 1. Since I'm going to be using this box primarily for video capture/edit from a Sharp Viewcam via composite jacks, is there a need to have 4 mgs of v-ram? I'll probably be using Quicktime Pro or some such editor and not need a high resolution????
2. Since the 7600 has no IDE bus (got it confused with the Beige G3 I guess) and the CD player is SCSI, I should forget finding a CD burner for internal installation and just get a USB card and external burner? 3.The bus (0) that the drives are on is marked Fast SCSI, and the slot next to it (empty) is marked Standard SCSI. What's that slot meant for? 4. The Rom is on the board, Right? So the Rom slot is perma-empty? 5. If I decided to get an IDE/ATA pci card, could I run two HD's and a CD burner off it? What is the routing for the IDE data cable from the card to devices? 6. One more time . . .there are no 56k pci modems for the Mac, right? 7. Kyle, would you repeat the drill on the DAV slot and Geoport clock slot, I'll try to focus. 8. I still need a CPU G3/300+ and have tons of stuff (or at least several hundred pounds) to swap -- All the best, R.A. Cantrell <[EMAIL PROTECTED]> -- PCI-PowerMacs is sponsored by <http://lowendmac.com/> and... Small Dog Electronics http://www.smalldog.com | Refurbished Drives | -- Sonnet & PowerLogix Upgrades - start at $169 | & CDRWs on Sale! | Support Low End Mac <http://lowendmac.com/lists/support.html> PCI-PowerMacs list info: <http://lowendmac.com/lists/pci-powermacs.shtml> --> AOL users, remove "mailto:"; Send list messages to: <mailto:[EMAIL PROTECTED]> To unsubscribe, email: <mailto:[EMAIL PROTECTED]> For digest mode, email: <mailto:[EMAIL PROTECTED]> Subscription questions: <mailto:[EMAIL PROTECTED]> Archive:<http://www.mail-archive.com/pci-powermacs%40mail.maclaunch.com/> Using a Mac? Free email & more at Applelinks! http://www.applelinks.com
