Your condition seems weird. You said that you reformatted your HDD but that suggests to me that you had to use a bootable CD to do so. If you were going to reformat your drive because of "problems", maybe the kind of problems you were having holds the key. I would reinitialize the drive and zero all data, just to make sure all would be OK.
Pardon me for asking, but what is inside your 7600? Hard drive(s), RAM, processor? Sounds like your CD Rom is malfunctioning. Kevin [EMAIL PROTECTED] wrote: > > I'm trying to re-install 9.1 on my 7600 after a reformat. > When I try to boot from the CD, the computer freezes at > the "welcome to macos" screen. It's been doing this for > about 3 days now while I've tried everyting I could think > of. I've replaced the PRAM battery, pulled/reseated ram, > pulled/reseated PCI cards, Pulled/reseated G3 zif and > finally returned the computer to stock. Each time I get > the freeze at startup. Does anyone have any > suggestions? > > Eric W. -- PCI-PowerMacs is sponsored by <http://lowendmac.com/> and... Small Dog Electronics http://www.smalldog.com | Refurbished Drives | -- Sonnet & PowerLogix Upgrades - start at $169 | & CDRWs on Sale! | Support Low End Mac <http://lowendmac.com/lists/support.html> PCI-PowerMacs list info: <http://lowendmac.com/lists/pci-powermacs.shtml> --> AOL users, remove "mailto:"; Send list messages to: <mailto:pci-powermacs@;mail.maclaunch.com> To unsubscribe, email: <mailto:pci-powermacs-off@;mail.maclaunch.com> For digest mode, email: <mailto:pci-powermacs-digest@;mail.maclaunch.com> Subscription questions: <mailto:listmom@;lowendmac.com> Archive:<http://www.mail-archive.com/pci-powermacs%40mail.maclaunch.com/> --------------------------------------------------------------- >The Think Different Store http://www.ThinkDifferentStore.com ---------------------------------------------------------------
